A.config router static-route 192.168.2.0/24 next-hop 10.2.3.2

B.config router static-route 192.168.2.0/24 next-hop 10.2.3.1

C.config router static-route 10.2.3.1 next-hop 192.168.2.0

D.config router static-route 10.2.3.2 next-hop 192.168.2.0

A.iBGP peering sessions with routers R1 and R5

B.An eBGP peering session with router R1, and iBGP peering sessions with routers R3 and R4

C.An iBGP peering session with router R1, and an eBGP peering session with router R4

D.eBGP peering sessions with routers R1, R3 and R4

A.An IP-filter may have multiple match criteria per entry.

B.The default-action of an IP-filter is always drop.

C.Multiple IP-filters can be applied in each direction.

D.An IP-filter may only be applied to a single interface if the scope is set to template.

E.IP-filters may be applied on interface ingress, egress, or both.

A.It is used when there is no other known route for a given packet's destination.

B.It matches a specific /32 host address with the least cost to the destination.

C.It is used when forwarding control plane data to the local CPM.

D.It is used when forwarding multicast and broadcast packets.

A.STM-1 with a bit rate of 51.84 Mbit/s

B.STM-1 with a bit rate of 155.52 Mbit/s

C.STM-1 with a bit rate of 2.048 Mbit/s

D.STM-1 with a bit rate of 1.544 Mbit/s