A.The neighbor shown is an ASBR router.

B.The address family between the peers should be VPN-IPv4 instead of IPv4.

C.The neighbor address cannot be the interface address 10.3.4.4.

D.The omitted AS number under "BGP summary" must be equal to 64496.

A.Identify the egress PE in the MPLS domain

B.Identify the customer network on the ingress PE

C.Establish the LSPs between PE devices

D.Identify the customer network on the egress PE

A.A routing protocol for exchanging routes with the internal customer routers and a routing protocol for exchanging routes with the PE

B.A single routing protocol for exchanging routes with both the internal customer routers and with the PE

C.MP-BGP to exchange routes with the PE.

D.MPLS and a routing protocol for the exchange of labels and routes with the PE

E.MPLS for exchanging labels with other CE devices

A.PE1 pushes three labels on the IP packet: a VPN label, a BGP label, and an LDP transport label.

B.ASBR2 pops the BGP label and pushes an LDP transport label.

C.ASBR1 pops the LDP and BGP labels and swaps the VPN label.

D.PE2 pops two labels and forwards the unlabeled packet to its destination.

A.MP-BGP for exchanging customer routes with other PEs

B.A routing protocol for exchanging customer routes with the CE

C.MPLS for exchanging labels with other provider core devices

D.MPLS for exchanging labels with the CE devices

E.Targeted LDP for exchanging VPRN labels with other PE devices

F.A label signaling protocol for defining transport tunnels between PE and CE devices