An HE TB PPDU (High Efficiency Trigger-Based Packet Data Unit) is used to respond with an uplink transmission to an MU-RTS trigger frame in the 802.11ax PHY (Physical Layer). An MU- RTS trigger frame is a frame that initiates a multi-user transmission opportunity (MU-TXOP) by requesting multiple stations (STAs) to send clear-to-send (CTS) frames on different spatial streams or resource units (RUs). An HE TB PPDU is a frame that contains data from multiple STAs that have been allocated RUs by an MU-RTS trigger frame or another type of trigger frame.
An HE SU PPDU (High Efficiency Single User Packet Data Unit) is a frame that contains data from a single STA using all available spatial streams or RUs. An HE MU PPDU (High Efficiency Multi User Packet Data Unit) is a frame that contains data from multiple STAs using different spatial streams or RUs without being triggered by another frame. A VHT PPDU (Very High Throughput Packet Data Unit) is a frame that uses the 802.11ac PHY and does not support multi- user transmissions.

Explanation
The STA is discovering a list of available BSSs by sending a Probe Request with an empty SSID element.
This is also known as a broadcast Probe Request, as it does not specify any particular SSID to probe for. Any AP that receives this Probe Request will respond with a Probe Response containing its own SSID and other information about its BSS. This way, the STA can learn about all the BSSs in its vicinity and choose which one to associate with . References: CWAP-404 Certified Wireless Analysis Professional Study and Reference Guide, Chapter 6: MAC Sublayer Frame Exchanges, page 191; CWAP-404 Certified Wireless Analysis Professional Study and Reference Guide, Chapter 6: MAC Sublayer Frame Exchanges, page 193.

Explanation
RTS is not a valid acknowledgement frame. RTS stands for Request To Send, and it is a control frame that is used to initiate an RTS/CTS exchange before sending a data frame. The purpose of an RTS/CTS exchange is to reserve the medium for a data transmission and avoid collisions with hidden nodes. An acknowledgement frame is a control frame that is used to confirm the successful reception of a data frame or a block of data frames. The valid acknowledgement frames are CTS (Clear To Send), Ack (Acknowledgement), and Block Ack (Block Acknowledgement) . References: CWAP-404 Certified Wireless Analysis Professional Study and Reference Guide, Chapter 6: MAC Sublayer Frame Exchanges, page 186; CWAP-404 Certified Wireless Analysis Professional Study and Reference Guide, Chapter 6: MAC Sublayer Frame Exchanges, page 187; CWAP-404 Certified Wireless Analysis Professional Study and Reference Guide, Chapter 6: MAC Sublayer Frame Exchanges, page 189; CWAP-404 Certified Wireless Analysis Professional Study and Reference Guide, Chapter 6: MAC Sublayer Frame Exchanges, page 190.

An 802.11 wireless adaptor is required for Wi-Fi integration in laptop-based spectrum analyzer software in addition to the spectrum analysis adapter. The spectrum analysis adapter is a hardware device that captures the RF signals in the wireless environment and sends them to the spectrum analyzer software for analysis and display. The 802.11 wireless adapter is a hardware device that connects the laptop to the wireless network and allows the spectrum analyzer software to correlate the RF data with the Wi-Fi data, such as SSID, channel, and BSSID. This enables the spectrum analyzer software to provide more context and insight into the spectrum activity and its impact on the Wi-Fi network. A firmware upgrade for the spectrum analysis adapter is not required for Wi-Fi integration, but it may be needed to fix bugs or add features to the device. A directional antenna is an antenna that focuses the RF energy in a specific direction and has a high gain and a narrow beamwidth. A directional antenna can be used with a spectrum analysis adapter to pinpoint the location or source of interference or noise in the wireless environment, but it is not required for Wi-Fi integration. SNMP read credentials to the WLAN controller or APs are not required for Wi-Fi integration, but they may be useful for obtaining additional information about the wireless network configuration and performance from the network devices.