The enhanced Check Point Antivirus Software Blade uses real-time virus signatures and anomaly-based protections from ThreatCloud™, the first collaborative network to fight cybercrime, to detect and block malware at the gateway before users are affected.
Reference: https://www.checkpoint.com/products/antivirus-software-blade/

Explanation/Reference:
SmartConsole
For simple hubs and spokes (or if there is only one Hub), the easiest way is to configure a VPN star community in R80 SmartConsole:
1. On the Star Community window, in the:
a. Center Gateways section, select the Security Gateway that functions as the "Hub".
b. Satellite Gateways section, select Security Gateways as the "spokes", or satellites.
2. On the VPN Routing page, Enable VPN routing for satellites section, select one of these options:
a. To center and to other Satellites through center - This allows connectivity between the Security Gateways, for example if the spoke Security Gateways are DAIP Security Gateways, and the Hub is a Security Gateway with a static IP address.
b. To center, or through the center to other satellites, to internet and other VPN targets - This allows connectivity between the Security Gateways as well as the ability to inspect all communication passing through the Hub to the Internet.
3. Create an appropriate Access Control Policy rule.
4. NAT the satellite Security Gateways on the Hub if the Hub is used to route connections from Satellites to the Internet.
The two Dynamic Objects (DAIP Security Gateways) can securely route communication through the Security Gateway with the static IP address.
Reference: https://sc1.checkpoint.com/documents/R80/CP_R80BC_VPN/html_frameset.htm