Explanation
The two Identity Awareness daemons that are used to support identity sharing are Policy Decision Point (PDP) and Policy Enforcement Point (PEP). PDP is a daemon that runs on Security Gateways that acquire identities from various sources, such as AD Query, Identity Agent, Captive Portal, etc. PEP is a daemon that runs on Security Gateways that enforce the security policy based on identities received from PDPs. Identity sharing is a feature that allows PDPs to share identities with other PDPs or PEPs in different gateways or domains.
References: [Check Point R81 Identity Awareness Administration Guide]

Explanation
The default port for the Gaia WebUI Portal is HTTPS 443. This is the standard port for secure web communication over SSL/TLS. Changing the port may cause inconsistency with the settings on the SmartConsole and is not recommended unless necessary. To change the port, you can use the CLISH command set web ssl-port <port number> and save the configuration. References: 13

The command cphaprob igmp can be used to display the Multicast MAC address of a cluster. This command shows the IGMP (Internet Group Management Protocol) information for each cluster interface, including the VRID (Virtual Router ID), the Multicast IP address, and the Multicast MAC address3. The other commands do not show the Multicast MAC address information. Reference: Check Point R81 ClusterXL Administration Guide

Explanation
The command to check the status of Check Point processes is cpwd_admin list. This command displays the process ID, name, state, start time, and watchdog status of all the processes that are monitored by the Check Point WatchDog daemon (CPWD). You can also use this command to start, stop, or restart a specific process.
References: [cpwd_admin Command]

Explanation
The port that the CPM process runs on is TCP 19009. CPM stands for Check Point Management, and it is the main process that runs on the Security Management Server and interacts with SmartConsole clients. CPM is responsible for managing policies, objects, logs, tasks, and other management functions. CPM listens on TCP port 19009 for incoming connections from SmartConsole clients. The other ports are either used by other processes or not related to CPM.