A.via next-hop 10.0 1 100

B.via next-hop 10.0 1.50

C.via next-hop 10.0.1.5

D.via next-hop 10 0 1.4

A.interface FastEthernet0/1 switchport mode access switchport voice vlan 10

B.Interface FastEthernet0/1 switchport trunk allowed vlan add 10 vlan 10 private-vlan isolated

C.Interface FastEthernet0/1 switchport trunk native vlan 10 switchport trunk allowed vlan 10,15

D.Interface FastEthernet0/1 switchport mode trunk switchport trunk allowed vlan 10,15

A.router ospf 1
network 192.168.1.1 0.0.0.0 area 0
hello interval 15
interface e1/1
Ip address 192.168.1.1 255.255.255.252

B.router ospf 1
network 192.168.1.1 0.0.0.0 area 0
interface e1/1
ip address 192.168.1.1 255.255.255.252
ip ospf cost 0

C.router ospf 1
network 192.168.1.1 0.0.0.0 area 0
interface e1/1
ip address 192.168.1.1 255.255.255.252
ip ospf network broadcast

D.router ospf 1
network 192.168.1.1 0.0.0.0 area 0
interface e1/1
ip address 192.168.1.1 255.255.255.252
ip ospf network point-to-point

A.They allow multiple devices lo serve as a single virtual gateway for clients in the network

B.They prevent (oops in the Layer 2 network.

C.They are able to bundle muftlple ports to increase bandwidth

D.They enable automatic failover of the default gateway.

E.They allow encrypted traffic.

A.Eliminate redundancy with a link failure in the data path.

B.Permit multiple VLANs to provide out-of-band management.

C.Allow multiple VLAN to be used in the data path.

D.Provide redundancy if there is a link failure for out-of-band management.