A.FF00::/12

B.FC00::/7

C.FE80::/10

D.2000::/3

A.Set the Radio Policy option to 802.11a Only.

B.Enable the Status option.

C.Enable the Broadcast SSID option

D.Set the Radio Policy option to 802 11g Only.

E.Set the Interface/Interface Group(G) to an interface other than guest

A.when the sending device waits 15 seconds before sending the frame again

B.when the cable length limits are exceeded

C.when one side of the connection is configured for half-duplex

D.when Carrier Sense Multiple Access/Collision Detection is used

E.when a collision occurs after the 32nd byte of a frame has been transmitted

A.SNMP

B.NTP

C.syslog

D.DNS lookup

A.ip address 192.168.0.0 255.255.254.0

B.ip address 192.168.0.0 255.255.255.224

C.ip address 192.168.0.0 255.255.255.128

D.ip address 192.168.0.0 255.255.0.0