One functional physical port is needed to pass client traffic. Switching features such as trunks and EtherChannels are controlled by negotiation mode, encapsulation, VLAN membership, and whether the selected protocol is Cisco proprietary or standards based. Cisco CCNA 200-301 v1.1 includes this topic under Network Access, so the answer must be validated against normal Cisco device behavior and the operational wording of the scenario. The key is not simply recognizing a familiar acronym; it is identifying what the feature does, where it is configured, and what result it produces. The incorrect options either disable negotiation, select the wrong negotiation protocol, or configure a mode that cannot form the requested link under the stated conditions. In a real network, selecting the wrong option would either leave the feature nonfunctional, create a forwarding or security gap, or send troubleshooting in the wrong direction. The selected answer is the only one that matches the stated requirement and the way Cisco switching, routing, services, security, wireless, or automation functions are expected to operate. This is why the verified answer remains the best technical choice for the question.

207.165.200.246 via Serial0/1/0. The scenario should be solved by matching the described behavior to the Cisco feature that actually performs it. Cisco CCNA 200-301 v1.1 includes this topic under IP Connectivity, so the answer must be validated against normal Cisco device behavior and the operational wording of the scenario. The key is not simply recognizing a familiar acronym; it is identifying what the feature does, where it is configured, and what result it produces. The other options are real networking terms or plausible phrases, but they operate at a different layer, solve a different problem, or do not create the outcome described. In a real network, selecting the wrong option would either leave the feature nonfunctional, create a forwarding or security gap, or send troubleshooting in the wrong direction. The selected answer is the only one that matches the stated requirement and the way Cisco switching, routing, services, security, wireless, or automation functions are expected to operate. This is why the verified answer remains the best technical choice for the question.

simplicity of configuration. A point-to-point leased line is valued for simplicity: it provides a dedicated connection between two sites with straightforward addressing and predictable behavior. It is usually not selected because of low cost; leased lines are often more expensive than shared broadband or packet-switched alternatives. Full-mesh capability is a topology property, not a benefit of a single point-to-point circuit. Cisco CCNA 200-301 v1.1 Network Fundamentals expects engineers to recognize WAN design tradeoffs. A point- to-point link is easy to understand and troubleshoot because there is one provider circuit and one remote endpoint. The corrected answer is simplicity of configuration. That is the classic advantage compared with more complex hub-and-spoke, partial-mesh, or multipoint WAN designs.

lightweight mode. Wireless questions require separating client association, RF design, AP mode, WLAN security, and controller policy. Cisco CCNA 200-301 v1.1 includes this under Network Access, where the expected skill is to identify the feature that actually creates the observed behavior or meets the configuration goal. The wording usually contains the decisive clue: a prefix length, a VLAN role, a protocol version, a wireless security standard, or a management-plane function. Incorrect answers usually confuse an encryption method with authentication, or a controller feature with a switchport feature. In an operational network, choosing the wrong option would typically cause failed connectivity, insecure management, poor wireless behavior, or incorrect forwarding. The selected answer matches the Cisco configuration model and is retained as the verified answer.

Select WPA2 Policy Disable PMF Enable PSK. Wireless questions depend on AP mode, WLAN security, RF band selection, controller interfaces, and client roaming or authentication behavior. Cisco CCNA 200-301 v1.
1 includes this under Network Access, where the expected skill is selecting the feature that actually produces the requested network behavior. The wording normally gives the clue: protocol family, address scope, trunk state, route preference, security mode, API method, or controller role. Wrong options confuse encryption with authentication, local switching with tunneling, or controller management with client data handling. In production, choosing the wrong option would typically cause failed client access, a broken route, insecure management, or an automation workflow that targets the wrong interface. The selected answer is the Cisco- consistent behavior for this item.