A.open authentication

B.high RSSI

C.foreign SSID

D.accepts clients

E.low RSSI

F.distant location

A.Set ORIGIN to either Wireless or All. Enable LSS by using the config mdns service Iss enable Apple TV command

B.Set ORIGIN to Wired. Enable LSS by using the config mdns service Iss All command

C.Set ORIGIN to Wired. Enable LSS by using the config mdns service Iss Apple TV command.

D.Set ORIGIN to either Wireless or All. Enable LSS by using the config mdns service Iss All command.

A.config flexconnect BranchA-FCG vlan 30 add

B.config flexconnect group BranchA-FCG vlan add 30

C.config flexconnect group BranchA-FCG vlan 30 add

D.config flexconnect BranchA-FCG vlan add 30

A.Configure a second WLC to support half of the APs in the deployment.

B.Configure one single SSID and implement Cisco ISE for VLAN assignment according to different user roles.

C.Configure different AP groups to support different VLANs, so that all of the WLANs can be broadcast on both radios.

D.Configure 16 WLANs to be broadcast on the 2.4-GHz band and 16 WLANs to be broadcast on the
5.0-GHz band.

A.wired traffic only

B.wireless traffic only

C.VPN traffic

D.wireless and wired traffic