Online Access Free Cisco.300-430.v2025-01-03.q180 Practice Test (Page 13)

300-430 Exam Question 56

What is an important consideration when implementing a dual SSID design for BYOD?

A.SSIDs for this setup must be configured with NAC State-RADIUS NAC for the clients to authenticate with Cisco ISE, or with NAC State-ISE NAC for Cisco ISE to associate the client.

B.After using the provisioning SSID, an ACL that used to make the client switch SSIDs forces the user to associate and traverse the network by MAC filtering.

C.If multiple WLCs are used, the WLAN IDs must be exact for the clients to be provisioned and traverse the network correctly.

D.One SSID is for provisioning and the other SSID is for gaining access to the network. The use of an ACL should not be enforced to make the client connect to the REAL SSID after provisioning.

300-430 Exam Question 57

Refer to the exhibit. An engineer must restrict some subnets to have access to the WLC. When the CPU ACL function is enabled. No ACLs in the drop-down list are seen.
What is the cause of the problem?

A.This configuration must be performed through the CLI and not though the web GUI

B.No ACLs have been created under the Access Control List tab.

C.The ACL does not have a rule that is specified to the Management interface.

D.When the ACL is created, it must be specified that it is a CPU ACL.

300-430 Exam Question 58

CMX Facebook Wi-Fi allows access to the network before authentication. Which two elements are available? (Choose two.)

A.Allow SNMP traffic only before authentication and block all the traffic.

B.Allow all the traffic before authentication and intercept HTTP only.

C.Allow all the traffic before authentication and intercept HTTPS only.

D.Allow HTTPs traffic only before authentication and block all other traffic.

E.Allow HTTP traffic only before authentication and block all the traffic.

300-430 Exam Question 59

A network engineer is configuring a Cisco AireOS 8.2 WLC, Cisco MSE, and Cisco PI with Cisco
3700 Series APs and Cisco Hyperlocation modules. The engineer configures and enables a WLAN with Hyperlocation. During testing, the engineer notices that the Hyperlocation module cannot be seen on the WLC. Which action resolves the issue?

A.Configure the APs to be in monitor mode.

B.Enable Hyperlocation in the Global Configuration settings of the WLC.

C.Add the key hash that is used to add the Hyperlocation module to the WLC.

D.Enable the NTP server that is connected to the Hyperlocation module.

300-430 Exam Question 60

Which feature on the Cisco Wireless LAN Controller must be present to support dynamic VLAN mapping?

A.FlexConnect ACL

B.VLAN name override

C.CCKM/OKC

D.AAA override

Other Version: 594Cisco.300-430.v2026-03-31.q161; 554Cisco.300-430.v2026-03-30.q136; 1167Cisco.300-430.v2024-08-08.q145; 1717Cisco.300-430.v2023-05-06.q102; 2059Cisco.300-430.v2022-12-06.q121; 100Cisco.Prep4sures.300-430.v2022-03-07.by.brady.132q.pdf; 3513Cisco.300-430.v2022-03-02.q132; 2975Cisco.300-430.v2021-10-31.q120; 88Cisco.Pdfvce.300-430.v2021-09-15.by.rita.120q.pdf

Latest Upload: 125VMware.3V0-21.25.v2026-06-20.q29; 131Microsoft.AB-731.v2026-06-19.q23; 271IIA.IIA-CIA-Part2.v2026-06-19.q308; 163DAMA.MD-1220.v2026-06-19.q66; 160ISTQB.CT-AI.v2026-06-18.q68; 249IIA.IIA-CIA-Part3.v2026-06-17.q220; 169WGU.Introduction-to-IT.v2026-06-17.q67; 233CompTIA.220-1202.v2026-06-16.q110; 146TheInstitutes.CPCU-500.v2026-06-16.q25; 232ACAMS.CAMS7-CN.v2026-06-16.q170

300-430 Exam Question 56

300-430 Exam Question 57

300-430 Exam Question 58

300-430 Exam Question 59

300-430 Exam Question 60

Download PDF File