A.Reduce the maximum SA limit on the local Cisco ASA.

B.Increase the maximum in-negotiation SA limit on the local Cisco ASA.

C.Remove the maximum SA limit on the remote Cisco ASA.

D.Correct the crypto access list on both Cisco ASA devices.

A.Add a route on the remote peer for 209.165.201.0/27.

B.Add a permit for TCP traffic going to 209.165.201.0/27.

C.Add a permit for TCP traffic going to 10.1.1.0/24.

D.Add a route on the local peer for 10.1.1.0/24.

A.Define the RADIUS server.

B.Verify that clients are using the correct authorization policy.

C.Define the AAA server.

D.Assign the list to an authorization policy.

E.Set the maximum segment size.

A.NHRP redirect is enabled on the hub.

B.The spokes have sent a resolution request.

C.NHRP cache entries exist on the spoke.

D.NHO routes exist on the spokes.

A.IKEv2

B.NHRP

C.mBGP

D.mGRE

E.GDOI