Cisco IOS software basically supports two modes of CEF load balancing: On per-destination or per-packet basis.
For per destination load balancing a hash is computed out of the source and destination IP address (-> Answer E is correct). This hash points to exactly one of the adjacency entries in the adjacency table (-> Answer D is correct), providing that the same path is used for all packets with this source/destination address pair. If per packet load balancing is used the packets are distributed round robin over the available paths. In either case the information in the FIB and adjacency tables provide all the necessary forwarding information, just like for non-load balancing operation.
The number of paths used is limited by the number of entries the routing protocol puts in the routing table, the default in IOS is 4 entries for most IP routing protocols with the exception of BGP, where it is one entry. The maximum number that can be configured is 6 different paths -> Answer A is not correct.
Reference:
https://www.cisco.com/en/US/products/hw/modules/ps2033/prod_technical_reference09186a008
00afeb7.html

https://en.wikipedia.org/wiki/Routing_table
In computer networking a routing table, or routing information base (RIB), is a data table stored in a router or a network host that "lists the routes to particular network destinations".

Mobility or roaming services enables a WLAN client to retain its association !!!seamlessly!!! while moving from one Access Point to another. Cisco WLAN controllers (WLC) can be organized into wireless mobility groups to support intercontroller roaming.