A.initiating connections with SD-WAN routers automatically

B.pushing of configuration toward SD-WAN routers

C.onboarding of SDWAN routers into the SD-WAN overlay

D.gathering telemetry data from SD-WAN routers

A.Use a virtual switch running as a separate virtual machine.

B.Use a virtual switch provided by the hypervisor.

C.Use VXLAN fabric after installing VXLAN tunneling drivers on the virtual machines.

D.Use a single trunk link to an external Layer2 switch.

E.Use a single routed link to an external router on stick.

A.When PIM snooping is enabled, the switch allows all multicast packets for each IP multicast group to send multicast packets to multicast router.

B.It requires designated forwarder election messages.

C.It requires IGMP snooping to be enabled on the switch.

D.It floods join and prune messages on all router ports.

E.The ip pirn snooping command is an interface-level command.

F.It requires RGMP to be enabled on the VLAN.

A.MAB

B.802.1X

C.WebAuth

D.port security sticky MAC

A.An SNMP event is generated when the value equals 80% for eight polling cycles.

B.An SNMP event is generated when the value reaches 80%.

C.An SNMP event is generated when the value is greater than 80% for eight polling cycles.

D.An SNMP variable is monitored and an action is triggered when the value exceeds 80%.