Online Access Free Cisco.350-501.v2024-06-28.q419 Practice Test (Page 22)

350-501 Exam Question 101

Refer to the exhibit.

An engineer needs to implement this QoS policy on customer's network due to ongoing slow network issues. What will be the effect on the network when the engineer implements this configuration?

A.Traffic that is identified in the ciscotest class map will be remarked from IP precedence 1 to DSCP AF11 when it enters the pos0/2/0/0 interface.

B.Traffic that is identified in the ciscopolicy class map will be marked with IP precedence 1 when it enters the pos0/2/0/0 interface.

C.Traffic that is identified in the ciscopolicy class map will be remarked from IP precedence 1 to DSCP AF11 when it exits the pos0/2/0/0 interface.

D.Traffic that is identified in the ciscotest class map will be marked with IP precedence 1 when it exits the poso/2/0/0 interface.

350-501 Exam Question 102

Refer to the exhibit.

An engineer is Implementing Auto-RP and reviewing the configuration of the PE-A. Which configuration permits Auto-RP messages to be forwarded over this interface?

A.PE-A(conflg-lf)#ip pfm sparst-mode

B.PE-A(config-if)#ip igmp version 3

C.PE-A(conflg-lf)#ip plm jparst-donse-mode

D.PE-A(config.if)#no ip pim btr-border

350-501 Exam Question 103

Refer to the exihibit.

Refer to the exhibit. The operations team for a service provider network is implementing a route map policy. OSPF area 0 should originate the default route with a type 2 metric of 2 when the application server on the connected interface (192.168.1.1) is up. Routers RL and RM have set up OSPF peering with other adjacent routers. Which action meets this requirement?

A.Apply default-information originate route-map ospf-default-route on router RL.

B.Configure distribute-list route-map ospf-default-route out on router RM.

C.Configure distribute-list route-map ospf-default-route out on router RL.

D.Apply default-information originate route-map ospf-default-route on router RM.

350-501 Exam Question 104

Refer to the exhibit. Router P4 and P5 receive the 0.0.0.0/0 route from the ISP via eBGP peering P4 is the primary Internet gateway router, and P5 is its Backup. P5 is already advertising a default route into OSPF domain. Which configuration must Be applied to P4 so that advertises a default route Into OSPF and Becomes me primary internet gateway for the network?