Online Access Free Cisco.350-501.v2024-06-28.q419 Practice Test (Page 40)

350-501 Exam Question 191

Refer to the exhibit. An ISP provides shared VoIP Extranet services to a customer in VRF-100 with these settings:
- The VoIP services are hosted in the 198.19.100.0/24 space.
- The customer has been assigned the 198.18.1.0/29 IP address block.
- VRF-100 is assigned import and export route target 65010:100.
Which configuration must the engineer apply to PE-1 to provision VRF-100 and provide access to the shared services?

A.vrf definition VRF-100
rd 172.17.255.1:100
!
address-family ipv4
export map VRF-100-EXPORT
import map VRF-100-IMPORT
exit-address-family
!
route-map VRF-100-EXPORT permit 10
match ip address prefix-list VRF-100-ALLOWED-EXPORT
set extcommunity rt 65010:100 65010:2999
route-map VRF-100-EXPORT permit 20
set extcommunity rt 65010:100
!
route-map VRF-100-IMPORT permit 10
match extcommunity VRF-100-RT SHARED-SERVICES
!
ip extcommunity-list standard SHARED-SERVICES permit rt 65010:1999
ip extcommunity-list standard VRF-100-RT permit rt 65010:100
ip prefix-list VRF-100-ALLOWED-EXPORT seq 5 permit 198.18.1.0/29

B.vrf definition VRF-100
rd 172.17.255.1:100
!
address-family ipv4
export map VRF-100-EXPORT
route-target import 65010:100
route-target import 65010:1999
exit address-family
!
route-map VRF-100-EXPORT permit 10
match ip address prefix-list VRF-100-ALLOWED-EXPORT
set extcommunity rt 65010:100 65010:2999
route-map VRF-100-EXPORT permit 20
set extcommunity r 65010:100
!
ip prefix-list VRF-100-ALLOWED-EXPORT seq 5 permit 198.18.1.0/29

C.vrf definition VRF-100
rd 172.17.255.1:100
!
address-family ipv4
export map VRF-100-EXPORT
route-target import 65010:100
route-target import 65010:2999
exit-address-family
!
route-map VRF-100-EXPORT permit 10
match ip address prefix-list VRF-100-ALLOWED-EXPORT
set extcommunity rt 65010:100 65010:1999
route-map VRF-100-EXPORT permit 20
set extcommunity rt 65010:100
!
ip prefix-list VRF-100-ALLOWED-EXPORT seq 5 permit 198.18.1.0/29

D.vrf definition VRF-100
rd 172.17.255.1:100
!
address-family ipv4
route-target export 65010:100
route-target export 65010:1999
route-target import 65010:100
route-target import 65010:2999
exit-address-family

350-501 Exam Question 192

Refer to the exhibit:

Assume all other configurations are correct and the network is otherwise operating normally. Which conclusion can you draw about the neighbor relationship between routers R1 and R2?

A.The neighbor relationship is down because R1 believes R2 is in AS 65012.

B.The neighbor relationship will be up only if the two devices have activated the correct neighbor relationships under the IPv4 address family

C.The neighbor relationship is up

D.The neighbor relationship is down because the loco I-as value for R2 is missing in the R1 neighbor statement

350-501 Exam Question 193

Drag and drop the NAT64 descriptions from the left onto the correct NAT64 types on the right.

350-501 Exam Question 194

A network engineer is configuring Flexible NetFlow and enters these commands

What are two results of implementing this feature instead of traditional NetFlow? (Choose two.)

A.CPU and memory utilization are reduced.

B.The accuracy of the data to be analyzed is improved.

C.The data export flow is more secure

D.Only the flows of top 100 talkers are exported.

E.The number of packets to be analyzed are reduced.

350-501 Exam Question 195

A network engineer is configuring a BGP route policy for the SUBNET prefix set. Matching traffic must be dropped, and other traffic must have its MED value set to 400 and community 4:400 added to the route. Which configuration must an engineer apply?