Online Access Free Cisco.350-501.v2024-06-28.q419 Practice Test (Page 79)

350-501 Exam Question 386

An engineering team must implement Unified MPLS to scale an MPLS network. Devices in the core layer use different IGPs, so the team decided to split the network into different areas. The team plans to keep the MPLS services as they are and introduce greater scalability. Which additional action must the engineers take to implement the Unified MPLS?

A.Move the IGP prefixes into IS-IS as the loopback prefixes of the PE routers to distribute the prefixes to other routers to create end-to-end LSPs.

B.Configure the ABR routers as route reflectors that redistribute IGP into BGP.

C.Redistribute the IGP prefixes into another IGP to ensure end-to-end LSPs.

D.Redistribute the IGP prefixes from one IGP into the other routers to ensure end-to-end LSPs.

350-501 Exam Question 387

Which additional feature does MPLS DiffServ tunneling support?

A.matching EXP and DSCP values

B.interaction between MPLS and IGP

C.PHB layer management

D.using GRE tunnels to hide markings

350-501 Exam Question 388

Refer to the exhibit:

Which statement about this configuration is true"?

A.It requires an explicit Cisco MPLS TE path to be configured for the tunnel to run

B.It requires OSPF to also be running to have optimized Cisco MPLS TE tunnels

C.It requires a dynamic Cisco MPLS TE path to be configured for the tunnel to run

D.It is the configuration for the head-end router of a Cisco MPLS TE tunnel with segment routing

350-501 Exam Question 389

While implementing TTL security, you issue the PE(config-router-af)#neighbor 2.2.2.2 ttl-security hops 2 command.
After you issue this command, which BGP packets does the PE accept?

A.from 2.2.2.2, with a TTL of 253 or more

B.from 2.2.2.2, with a TTL of less than 2

C.to 2.2.2.2, with a TTL of less than 253

D.to 2.2.2.2, with a TTL of 2 or more

350-501 Exam Question 390

An engineer is setting up overlapping VPNs to allow VRF ABC and XYZ to communicate with VRF CENTRAL but wants to make sure that VRF ABC and XYZ cannot communicate.
Which configuration accomplishes these objectives?