350-501 Exam Question 166
Refer to the exhibit.

A network operator must configure CSR1 interlaces GigabitEihernet2 and GigabitEthemet to rewrite VLAN tags 12 and 21 for traffic between R1 and R2 respectively. Which configurator accomplishes this task?
A)

B)

C)


A network operator must configure CSR1 interlaces GigabitEihernet2 and GigabitEthemet to rewrite VLAN tags 12 and 21 for traffic between R1 and R2 respectively. Which configurator accomplishes this task?
A)

B)

C)

350-501 Exam Question 167
Refer to the exhibit.

An engineer is reviewing the BGP configuration. Which routes must be advertised to 10.10.10.1

An engineer is reviewing the BGP configuration. Which routes must be advertised to 10.10.10.1
350-501 Exam Question 168
Refer to the exhibit. EIGRP is running across the core to exchange internal routes, and each router maintains iBGP adjacency with the other routers on the network. An operator has configured static routes on the edge routers R1 and R2 for IP address 10.0.1.1, which is used as a black hole route as shown. Which configuration should the operator implement to the management router to create a route map that will redistribute tagged static routes into BGP and create a static route to blackhole traffic with tag 777 that is destined to the server at
192.168.10.100?

router(config)# route-map blackhole-trigger
router(config-route-map)# match tag 777
router(config-route-map)# set ip next-hop 10.0.1.1
router(config-route-map)# set origin igp
router{config-route-map)# set community no-export
192.168.10.100?

router(config)# route-map blackhole-trigger
router(config-route-map)# match tag 777
router(config-route-map)# set ip next-hop 10.0.1.1
router(config-route-map)# set origin igp
router{config-route-map)# set community no-export
350-501 Exam Question 169
Which configuration modifies Local Packet Transport Services hardware policies?
350-501 Exam Question 170
Refer to the exhibit.

A network operator working for service provider with an employee id: 1234:56:789 applied this configuration to a router.
Which additional step should the engineer use to enable LDP?

A network operator working for service provider with an employee id: 1234:56:789 applied this configuration to a router.
Which additional step should the engineer use to enable LDP?
