A.WebEx traffic will be load-balanced between both active WAN links.

B.WebEx traffic will prefer WAN 2 as long as it is up.

C.WebEx traffic will prefer WAN 1 as it is the primary uplink.

D.WebEx traffic will prefer WAN 2 as long as it meets the thresholds in the "Conf" performance class.

A.A 25-percent throughput loss occurs for every hop. Cisco Meraki best practice recommends a 1-hop maximum.

B.A 25-percent throughput loss occurs for every hop. Cisco Meraki best practice recommends a 2-hop maximum.

C.A 50-percent throughput loss occurs for every hop. Cisco Meraki best practice recommends a 1-hop maximum.

D.A 50-percent throughput loss occurs for every hop. Cisco Meraki best practice recommends a 2-hop maximum.

A.Currently associated clients are disconnected.

B.New clients can connect.

C.New clients cannot connect.

D.Currently associated clients are affected by restrictive traffic shaping rules.

E.Currently associated clients stay connected.

A.Change the assigned speeds of WAN 1 and WAN 2 so that the ratio is 4:1.

B.Set the speed of the cellular uplink to zero.

C.Change the primary uplink to "none".

D.Add an internet traffic preference that defines the load-balancing ratio as 4:1.

E.Enable load balancing.

A.For IPsec tunneling, peers use high UDP ports within the 32768 to 61000 range.

B.Peers contact the VPN registry at UDP port 9350.

C.For IPsec tunneling, peers use high TCP ports within the 32768 to 61000 range.

D.Peers contact the VPN registry at TCP port 9350.

E.For IPsec tunneling, peers use UDP ports 500 and 4500.