A.The extended ping command is supported from user EXEC mode.

B.With the extended ping command you can specify the TCP and UDP port to be pinged.

C.The extended ping command is available from privileged EXEC mode.

D.With the extended ping command you can specify the datagram size.

E.With the extended ping command you can specify the timeout value.

A.The configuration is incomplete, which will cause the interface status to be "Serial0/0/0 is down, line protocol is down".

B.A ping to the remote address 209.165.200.226 will be successful.

C.The configuration is incomplete, which will cause the interface status to be "Serial0/0/0 is up, line protocol is down".

D.The interface is using Cisco HDLC for the Layer 2 encapsulation.

A.Replace the broken cable between the two devices.

B.Use the no shutdown command on the Hub router.

C.Start the clock on the Hub router.

D.Change the IP address on the Spoke router.

E.Configure the serial 0/0 interface on the Spoke router with a clockrate.

A.The serial interface has a full buffer.

B.The serial interface does not have a cable attached.

C.The serial interface is configured for half duplex.

D.The serial interface is configured for the wrong frame size.

E.The serial interface has the wrong type of cable attached.