A.16 Kbit/sec

B.32 Kbit/sec

C.64 Kbit/sec

D.128 Kbit/sec

E.512 Kbit/sec

F.1544 Kbit/sec

A.The stop bits should be set to 2.

B.The data bits should be set to 6.

C.Flow control should be set to hardware.

D.Parity should be set to mark.

E.The bits per second should be set to 9600.

A.holds packet buffers for the router

B.controls how the router boots

C.holds the router run-time configuration

D.verifies that all router components are operational

E.starts and maintains the router

A.Configure Hosts C and D with IP addresses in the 192.168.2.0 network

B.Install a second switch and put Hosts C and D on that switch while Hosts A and B remain on the original switch.

C.Enable the VLAN trunking protocol on the switch.

D.Install a router and configure a route to route between VLANs 2 and 3.

A.172.16.20.0

B.172.16.9.0

C.172.16.8.0

D.172.16.31.0