Explanation
A router (option C) is a network device that is used to separate broadcast domains. A broadcast domain is a logical division of a computer network in which all nodes can reach each other by broadcast at the data link layer. Routers operate at the network layer of the OSI model and use routing tables to determine the best path for forwarding packets between different networks.
By separating broadcast domains, routers can help to reduce network congestion and improve performance.
When a router receives a broadcast packet on one of its interfaces, it does not forward the packet to any other interfaces. This means that only devices within the same broadcast domain as the sender will receive the broadcast packet.

Explanation
RAID 1 is a mirrored configuration that utilizes two drives and provides redundancy by allowing one drive to fail without data loss. This configuration meets the requirement of mirrored storage with two 4TB drives that support one failure. References: CompTIA A+ Certification Exam Guide, Ninth Edition, Chapter 8

Explanation
The correct answer is D. VPN.
A VPN (Virtual Private Network) is a service that allows a remote user to access network resources securely over the internet. A VPN creates an encrypted tunnel between the user's device and the VPN server, which acts as a gateway to the network. The user can then access the network resources as if they were directly connected to the network, without exposing their traffic to eavesdropping, interception, or censorship.
A VPN can provide remote users with access to various services on a company network, such as file and print services, client/server applications, and remote network administration1. A VPN can also protect the user's privacy and identity online by masking their IP address and location.
References:
*Remote Access to a Network - NETWORK ENCYCLOPEDIA, section "Remote access typically gives remote users access to the following services on a company network".

Explanation
A private cloud deployment model provides the company with complete control over how the data is managed. This is because a private cloud is managed solely by the organization and resides on-premises or in a data center. Therefore, a private cloud deployment model is the best option for this scenario.

Explanation
This is an example of a public IP address that can be assigned by an ISP to a router's WAN (Wide Area Network) port. A public IP address is a globally unique and routable address that allows a device to communicate with other devices on the internet. A private IP address, such as 10.1.50.30 or 172.22.40.6, is a non-routable address that is used within a local network and cannot be directly accessed from the internet. A link-local IP address, such as 169.254.168.10, is a self-assigned address that is used when a device cannot obtain a valid IP address from a DHCP server.