Explanation
One of the possible causes of a laptop randomly turning off is liquid damage, which can cause short circuits, corrosion, and overheating of the internal components1. Liquid damage can be hard to detect, especially if the laptop has been dried or cleaned after the spill2. However, one of the indicators of liquid damage is the presence of small sticker paper within the device that changes color from red to blue3.
These stickers are called liquid contact indicators (LCIs), and they are designed to show if a device has been exposed to water or other liquids3. LCIs are usually red when dry, but they turn blue or purple when wet3. LCIs are often placed near the ports, battery, keyboard, and motherboard of laptops and other electronic devices3. LCIs can help technicians diagnose liquid damage and determine if the device is covered by warranty or not3.

Explanation
802.11 ax is a wireless networking protocol that supports both 2.4GHz and 5GHz devices, as well as backward compatibility with previous 802.11 standards. 802.11 ax offers higher data rates, lower latency, increased capacity, and improved power efficiency than previous protocols. It is also known as Wi-Fi 6 or High Efficiency Wireless (HEW). Reference:
https://www.comptia.org/training/books/a-core-1-220-1101-study-guide (page 82)

Explanation
M.2 NVMe SSD provides the fastest data access possible for a laptop. It is a high-performance solid-state drive that connects directly to the motherboard through an M.2 slot.

Explanation
A load balancer is a network device or service that distributes incoming network traffic across multiple servers, based on various criteria, such as availability, capacity, performance, or location. A load balancer can ensure that the servers' resources will be utilized efficiently, as well as improve reliability, scalability, and security. A load balancer can be hardware-based or software-based, or a combination of both. Reference:
https://www.comptia.org/training/books/a-core-1-220-1101-study-guide (page 79)

Explanation
The most likely answer is A. Change the resolution settings.
The error "Out of Range" normally means that the resolution being output by the computer is not compatible with the projector. The resolution is the number of pixels that are displayed on the screen. If the resolution is too high for the projector, it may not be able to display the image correctly or at all12.
To resolve this issue, you should try lowering the resolution settings on your laptop to match the native resolution of the projector or a lower one. You can do this by following these steps1:
*Right-click on an empty area of your desktop and select Display settings.
*Under Scale and layout, click on Display resolution and choose a lower option from the drop-down menu.
*Click Apply and then Keep changes.
*Reconnect your laptop to the projector and check if the image is displayed properly.
If changing the resolution settings does not help, you may need to check other factors, such as the video cable, the display settings, or the video card driver. However, these are less likely to cause the "Out of Range" error than the resolution settings.