Explanation
In this situation, the MOST cost-effective cable medium that would not sacrifice system performance would be B. Shielded Cat 6. Electromagnetic interference (EMI) can disrupt network connectivity by interfering with the signals transmitted over network cables. Shielded Cat 6 cables are designed to provide protection against EMI by incorporating a layer of shielding material around the cable's conductors. This shielding helps to prevent EMI from interfering with the signals transmitted over the cable.

Explanation
SAS stands for Serial Attached SCSI, which is a bit serial interface successor to SCSI sponsored by ANSI and introduced in 20041. SAS is the most common interface for enterprise HDDs, especially those with high performance and high reliability requirements, such as 15,000rpm drives23. SAS offers faster data transfer speeds, lower power consumption, and better scalability than other interfaces1.

Explanation
The first step in troubleshooting a printer issue is to disconnect the printer power to avoid electric shock or further damage to the printer. The technician can then inspect the fuser and determine if it needs to be replaced or repaired. Installing a printer roller kit or replacing the paper with thicker paper stock will not solve the problem of the overheating fuser. Replacing the fuser without disconnecting the power is dangerous and not recommended. References: https://www.comptia.org/certifications/a#examdetails
https://www.comptia.org/blog/what-is-a-fuser

Explanation
The clicking sound is the sound of a damaged disk in the HDD
A clicking sound from a hard disk drive typically indicates a mechanical failure, such as the read/write head hitting a physical obstruction or a problem with the disk motor. This can cause the drive to fail to initialize or not be recognized by the system during booting.

Explanation
To configure a printer for network communications, the technician must configure its network settings, such as gateway, subnet mask, and IP address. The gateway is the IP address of the router or device that connects the printer to other networks or the internet. The subnet mask is a value that defines which part of the IP address identifies the network and which part identifies the host or device on that network. The IP address is a unique identifier that allows the printer to communicate with other devices.