A digitizer is a device that converts analog signals, such as touch or pressure, into digital signals that can be processed by a computer. A digitizer is usually embedded in the screen of a smartphone or tablet, and it works with a compatible stylus to enable drawing and writing on the screen1.
There are different types of digitizers and styluses, such as capacitive, resistive, active, and passive. Capacitive digitizers and styluses work by detecting changes in the electric field on the screen when the stylus touches it.
Resistive digitizers and styluses work by detecting changes in the resistance on the screen when the stylus presses it. Active digitizers and styluses work by using an electromagnetic field to communicate between the stylus and the screen. Passive digitizers and styluses work by using a special material on the tip of the stylus that mimics the human finger2.
Not all digitizers and styluses are compatible with each other. For example, an active stylus will not work with a capacitive or resistive digitizer, and vice versa. A passive stylus will work with any digitizer, but it will not have any advanced features, such as pressure sensitivity or tilt control2.

Telnet is an unsecure remote access protocol that allows a user to connect to a remote device and execute commands on it12. Telnet does not encrypt the data that is transmitted between the user and the device, which means that anyone who intercepts the network traffic can read the information, including usernames and passwords12. Telnet also does not authenticate the user or the device, which means that anyone can impersonate either party and gain unauthorized access1.

NVMe (Non-Volatile Memory Express) drives are high-speed solid-state drives that utilize the PCIe (Peripheral Component Interconnect Express) interface to connect to the motherboard. Before purchasing an NVMe drive, the user should confirm that the PC has an available M.2 slot for the drive and that the PC has a PCIe interface for the M.2 slot.
SATA (Serial ATA) is an older interface for hard drives and is not compatible with NVMe drives. SAS (Serial Attached SCSI) is a newer interface for hard drives and is typically used for enterprise-level storage systems.
SCSI (Small Computer System Interface) is a parallel interface for hard drives that is primarily used in high-end workstations and servers. DRAM (Dynamic Random Access Memory) is a type of memory commonly used in computers, but it is not relevant to the storage of data on a hard drive.
Reference: CompTIA A+ Core 1 Exam Guide, page 267.

it normally uses A4 sized labels and it contains white space in the middle of pages so it went from sized labels to full pages

Explanation
The screen needs to be recalibrated. The cursor drift is a common symptom of a misaligned touch screen, which can be caused by physical shocks, temperature changes, or software updates. The screen can be recalibrated using the tablet's settings or a utility program. The screen is not physically damaged, as there is no visible crack or break. The screen rotation is not related to the cursor drift, as it only affects the orientation of the display. The touch-pen battery is not relevant, as the cursor drift occurs even without using the pen.