The internal antennas are the components that allow the laptop to receive and transmit wireless signals. If the internal antennas are not connected properly, the laptop may have a weak or no Wi-Fi signal. The technician should verify that the internal antennas are connected to the wireless card and routed correctly inside the laptop case. The internal antennas may have been disconnected or damaged during the screen replacement. The device having the latest OS updates, the wireless device drivers being the latest version, airplane mode being disabled, and the battery being charging are not related to the issue, as they do not affect the physical connection of the internal antennas.

A router is a device that connects one or more networks, such as a home or small office network, to the internet. It allows multiple devices to share a single internet connection and provides network address translation (NAT) to enable communication between the devices on the local network and the internet. A hub, Ethernet gateway, or wireless access point does not provide this functionality.
A router is the most likely device to be used to connect one or more devices to the internet in a SOHO. A router can provide network address translation (NAT), firewall protection, and other features that are important for securing and managing a network. Reference: CompTIA A+ Certification Exam Guide, pg. 355

When installing a wireless point-to-point connection between two buildings, the technician should consider the allowable limits for transmit power, which vary depending on the country or region. Exceeding these limits could interfere with other wireless devices or violate regulations. NFC protocol data rate, RFID frequency range, and Bluetooth version compatibility are not relevant for a wireless point-to-point connection.

Explanation
he main difference between T568A and T568B cabling standards is that the green and orange cables are interchanged12. T568A is designed for backward compatibility with older telephone wires, while T568B is designed for better signal isolation and noise protection for newer networking systems and products3. T568A is used in blue cables, and T568B is used in green cables . The standards use the same cable connectors3.