The most likely cause of the issue is that the user's USB-C hub is faulty or incompatible with the laptop. The USB-C hub is a device that allows the user to connect multiple peripherals to the laptop using a single USB-C port. If the hub is not working properly, it may prevent the monitor, keyboard, mouse, and headset from functioning. The technician should replace the user's USB-C hub with a new one that is compatible with the laptop and test the peripherals again. Verifying the AC adapter voltage will not help with the issue, as the AC adapter is used to power the laptop, not the peripherals. Repairing the operating system will not help either, as the issue is not related to software. Reinstalling the drivers for affected devices may not help, as the issue may be caused by the hub, not the devices. Making sure the printer is not drawing too much power is irrelevant, as the printer is not connected to the hub or affecting the other peripherals. Reference: https://www.comptia.org/blog/what-is-usb-c

Explanation
The most common symptoms that indicate fuser deterioration are: The print leaves parallel spots across a sheet. The printer begins to loosen toner and does not stick to the sheet. Stains on printed sheets. Annoying noise from gear wear. The fusers are the core in the printing process of a laser printer. The Fuser is the piece that fixes the toner on the paper.

Explanation
Primary Array:
Drag and drop two 120 GB SSD hard drives to the primary array bay.
Open the primary array and select RAID 1 as the RAID level. RAID 1 provides fault tolerance of one drive, ability to function with only one drive, easily recoverable data, high redundancy, and very fast on reads. It also does not need to be scalable and uses the minimum number of drives (two) for RAID 1.
Confirm the configuration and close the primary array.
Secondary Array:
Drag and drop two 300 GB SSD hard drives to the secondary array bay.
Open the secondary array and select RAID 0 as the RAID level. RAID 0 provides the best write performance and uses the minimum number of drives (two) for RAID 0. It also provides a total space of
600 GB (300 GB x 2), which meets the requirement.
Confirm the configuration and close the secondary array.
You have completed the configuration of the storage arrays.

The main reason to use a virtual machine as a sandbox is to test new software in a safe environment without risking the integrity of the host operating system. Using a virtual machine enables the testing of software and allows for the isolation of the software from the host system. Reference: CompTIA A+ Certification Study Guide, Tenth Edition, pg. 409