This is because the fuser is the part of the printer that heats and melts the toner onto the paper. If the fuser is defective or dirty, it can cause streaks or smudges on printed pages. The system board and the memory are not related to the quality of the print output. The paper tray may cause paper jams or misfeeds, but not streaks on the paper.

Rapid elasticity would be used by an online retailer to quickly add more web servers during peak sales times.
References: CompTIA A+ Certification Exam Guide, Exam 220-1001, Page 405

A line-of-sight wireless system is a type of wireless communication that requires a clear and unobstructed path between the transmitter and the receiver. This can be achieved by using directional antennas that focus the radio signals in a narrow beam. A line-of-sight wireless system can provide a stable network connection between two buildings that are within the range and visibility of each other.
However, before purchasing and installing a line-of-sight wireless system, one of the factors that needs to be considered is the regulatory power limits. The power limit is the maximum amount of radio frequency (RF) energy that a transmitter can emit. Different countries and regions have different regulations and standards for the allowable power levels of wireless devices. Exceeding the power limit can cause interference with other wireless services, such as aviation, radio, television, etc. It can also pose health and safety risks to humans and animals.
Therefore, a technician should check the local laws and regulations for the power limits of the wireless system before buying and installing it. The technician should also use a proper tool to measure the actual power output of the transmitter and adjust it accordingly. The technician should also ensure that the transmitter and receiver are aligned properly and have a clear line of sight without any obstacles.
The other options are not relevant to the line-of-sight wireless system. The IP address range is a set of numerical identifiers that are assigned to devices on a network. It does not affect the physical transmission of wireless signals. The SSID broadcast is a feature that allows a wireless network to announce its name and availability to nearby devices. It does not affect the stability of the network connection between two buildings.
The firewall rules are a set of policies that control the incoming and outgoing traffic on a network. They do not affect the line-of-sight wireless system.
References:
Wireless line-of-sight, non-line-of-sight, beyond-line-of-sight propagation Point-to-point Wi-Fi bridging between buildings-the cheap and easy way How Does Wireless Internet, or Line of Sight Internet Work?
Line-of-Sight Transmission - Engineering LibreTexts
What is Line of Sight (LoS)? - Definition from Techopedia

A captive portal is a web page that requires users to agree to terms and conditions, enter credentials, or provide payment information before accessing a wireless network. Some devices, such as streaming media devices, may not have a web browser or a user interface to interact with the captive portal. One possible solution is to connect to the hotspot on the user's device, such as a smartphone or a tablet, and use it as a bridge to access the internet through the wireless network. The user's device can authenticate with the captive portal and share its internet connection with other devices via Wi-Fi, Bluetooth, or USB. Reference:
https://partners.comptia.org/docs/default-source/resources/a-core-1-content-guide (page 12)

One of the possible causes of the error message "No Source Found" is that the projector is not receiving any signal from the connected device, such as a laptop1. This could be due to an incorrect input source selected on the projector or an improper display setting on the laptop. Therefore, the first actions that the technician should take are to verify the projector settings and make sure the correct input is selected, and to check the laptop display settings and set them to extend/duplicate23.