The maximum distance that Cat 5, Cat 5e, Cat 6, and Cat 6a cables can be ran is 100 meters or 328 feet, according to the TIA/EIA standards. This is the maximum length for a cable segment, which is the distance between two devices, such as a switch and a computer, or a router and a printer. If the cable segment exceeds this length, the signal quality may degrade and cause errors or loss of data. Therefore, it is important to measure the cable length before installation and use repeaters or extenders if necessary.
References
1 Cable Distance | Comms InfoZone
2 Discussing Cat5 and Cat6 Max Length Limits - ShowMeCables
3 Cat5e vs Cat6 - Difference and Comparison | Diffen

NVMe stands for Non-Volatile Memory Express, and it is a type of SSD (solid state drive) that uses PCIe (Peripheral Component Interconnect Express) interface to connect to a computer. NVMe SSDs offer faster performance and lower latency than other types of SSDs, such as SATA (Serial ATA) or M.2 SAT A) If a user reports that a PC occasionally fails to boot and makes clicking sounds in the area where non-volatile storage is installed, it indicates that the hard drive is failing and needs to be replaced with an NVMe SSD.

Domain Name System (DNS) is an Internet service that translates domain names (e.g., its.umich.edu) into IP addresses. Dynamic Host Configuration Protocol (DHCP) is a protocol for automatically assigning IP addresses and other configurations to devices when they connect to a network.