If multiple users in a new building are unable to access the company's intranet site via their web browser but are able to access internet sites, the network administrator can resolve this issue by correcting the DNS server entries in the DHCP scope. The DHCP scope is responsible for assigning IP addresses and DNS server addresses to clients. If the DNS server entries are incorrect, clients will not be able to access intranet sites.
Reference:
CompTIA Network+ Certification Study Guide, Exam N10-007, Fourth Edition, Chapter 4: Network Implementations, Objective 4.4: Explain the purpose and properties of DHCP.

EIGRP is an advanced distance vector routing protocol that is able to automatically update routing tables and also uses features of link-state routing protocols, such as the ability to send updates about the current topology of the network. EIGRP also has the ability to use a variety of algorithms to determine the best route for a packet to take, allowing for more efficient routing across the network.

RTSP stands for Real Time Streaming Protocol and is an application-level network protocol designed for controlling media playback on streaming media servers. RTSP uses the default transport layer port number 554 for both TCP and UDP1. Port 445 is used for SMB (Server Message Block), a protocol for file and printer sharing. Port 587 is used for SMTP (Simple Mail Transfer Protocol), a protocol for sending email messages. Port 5060 is used for SIP (Session Initiation Protocol), a protocol for initiating and managing multimedia sessions.

A camera is most likely to utilize PoE (Power over Ethernet). PoE is a technology that allows electrical power to be delivered over Ethernet cables. It is used to power a variety of devices, such as cameras, phones, access points, and other networking equipment.Cameras are particularly well-suited for PoE because they are often installed in locations where it is difficult or impossible to run electrical power. By using PoE, cameras can be powered directly over the Ethernet cable, eliminating the need for separate power cables and outlets.Other devices, such as printers, hubs, and modems, are less likely to utilize PoE because they typically do not need to be powered over Ethernet. These devices are usually powered by AC (alternating current) power and are typically connected to a power outlet rather than an Ethernet cable.