Explanation
Updating the firewalls with current firmware and software is an important step to ensure all the firewalls are hardened successfully, as it can fix any known vulnerabilities or bugs and provide new features or enhancements. Enabling an implicit permit rule is not a good practice for firewall hardening, as it can allow unwanted traffic to pass through the firewall. Configuring the log settings on the firewalls to the central syslog server is a good practice for monitoring and auditing purposes, but it does not harden the firewalls themselves.
Using the same complex passwords on all firewalls is not a good practice for password security, as it can increase the risk of compromise if one firewall is breached. References: CompTIA Network+ Certification Exam Objectives Version 2.0 (Exam Number: N10-006), Domain 3.0 Network Security, Objective 3.3 Given a scenario, implement network hardening techniques.

Explanation
802.11a/b/g/n/ac wireless networks operate in two frequency ranges: 2.4 GHz and 5 GHz. The 5 GHz frequency range supports more channels than the 2.4 GHz frequency range, making it a better choice for high-density wireless networks.
References: CompTIA Network+ Certification Study Guide, Sixth Edition by Glen E. Clarke

Explanation
The switchport is shut down, which means it is administratively disabled and cannot forward traffic. The image shows that the switchport status is "down" and the protocol status is "down", indicating that there is no physical or logical connection. The cable is plugged in, as shown by the "connected" message under the interface name. The loopback is not set, as shown by the "loopback not set" message under the encapsulation type. The bandwidth configuration is correct, as shown by the "BW 10000 Kbit/sec" message under the MTU size. References: [CompTIA Network+ Certification Exam Objectives], Domain 3.0 Infrastructure, Objective
3.1: Given a scenario, use appropriate networking tools, Subobjective: Command line tools (ping, netstat, tracert, etc.)