Enhanced Interior Gateway Routing Protocol (EIGRP) is a hybrid routing protocol23. It combines the features of Distance Vector Routing Protocol (DVRP) and Link State Routing Protocol (LSRP), making it an effective solution for larger networks that require scalable and efficient routing

Clustering is a technique that involves grouping multiple servers or instances together to provide high availability and fault tolerance for a database. Clustering can help improve the availability of a SQL database by allowing automatic failover and load balancing between the cluster nodes. If one node fails or becomes overloaded, another node can take over the database operations without disrupting the service. Reference: https://www.educba.com/sql-cluster/

The logging level debugging is the highest level of logging, which means that the switch will log every possible event, including low-priority and verbose messages. This can result in excessive amounts of data being sent to the syslog server, which can affect the performance and storage of the server. To fix the issue, the technician should adjust the logging level to a lower value, such as informational, warning, or error, depending on the desired level of detail and severity. This will reduce the amount of log data generated by the switch and only send the relevant and necessary messages to the syslog server.
https://betterstack.com/community/guides/logging/log-levels-explained/

Establishing a theory of probable cause is the third step in the general troubleshooting process, after identifying the problem and gathering information. Establishing a theory of probable cause involves using the information gathered to formulate one or more possible explanations for the problem and testing them to verify or eliminate them. In this scenario, the network technician has confirmed the problem exists and should proceed to establish a theory of probable cause based on the information available, such as the network upgrade that was completed the night before.
Implementing a solution to fix the problem is the fifth step in the general troubleshooting process, after establishing a plan of action. Implementing a solution involves applying the chosen method or technique to resolve the problem and verifying its effectiveness. In this scenario, the network technician has not established a plan of action yet and should not implement a solution without knowing the cause of the problem.
Creating a plan of action to resolve the problem is the fourth step in the general troubleshooting process, after establishing a theory of probable cause. Creating a plan of action involves selecting the best method or technique to address the problem based on the available resources, constraints, and risks. In this scenario, the network technician has not established a theory of probable cause yet and should not create a plan of action without knowing the cause of the problem.
Documenting the problem and the solution is the seventh and final step in the general troubleshooting process, after implementing preventive measures. Documenting the problem and the solution involves recording the details of the problem, its symptoms, its cause, its solution, and its preventive measures for future reference and improvement. In this scenario, the network technician has not implemented preventive measures yet and should not document the problem and the solution without resolving and preventing it.

One possible cause of poor wireless performance is a bottleneck in the network, which means that other devices or applications are consuming too much bandwidth or resources and limiting the speed of the wireless access point. To troubleshoot this issue, the engineer should ensure that there is no congestion or interference from other devices on the network, such as wired clients, servers, routers, switches, or other wireless access points. The engineer can use tools such as network analyzers, bandwidth monitors, or ping tests to check the network traffic and latency12.
Another possible cause of poor wireless performance is outdated firmware on the device, which may contain bugs or vulnerabilities that affect the functionality or security of the wireless access point. To troubleshoot this issue, the engineer should install the latest firmware for the device from the manufacturer's website or support portal. The engineer should follow the instructions carefully and backup the configuration before updating the firmware. The engineer can also check the release notes or changelog of the firmware to see if there are any improvements or fixes related to the wireless performance3 .
The other options are not relevant to troubleshooting poor wireless performance. Creating a new VLAN for the access point may help with network segmentation or security, but it will not improve the speed of the wireless connection. Making sure the SSID is not longer than 16 characters may help with compatibility or readability, but it will not affect the wireless performance. Configuring the AP in autonomous mode may give more control or flexibility to the engineer, but it will not enhance the wireless speed. Installing a wireless LAN controller may help with managing multiple access points or deploying advanced features, but it will not increase the wireless performance.