See the solution in Explanation.
Explanation:
To validate routing between networks hosting Workstation A and File Server 2, follow these steps:
Review Routing Tables:
Check the routing tables of Router A, Router B, and Router C to identify any missing routes.
Identify Missing Routes:
Ensure that each router has routes to the networks on which Workstation A and File Server 2 are located.
Add Static Routes:
If a route is missing, add a static route to the relevant destination network via the correct interface.
Routing Table:
Gateway of last resort is 0.0.0.0 to network 0.0.0.0
S* 0.0.0.0/0 is directly connected, GigabitEthernet3
10.0.0.0/8 is variably subnetted, 4 subnets, 2 masks
C 10.0.4.0/22 is directly connected, GigabitEthernet2
C 10.0.6.0/24 is directly connected, GigabitEthernet2
L 10.0.6.1/32 is directly connected, GigabitEthernet2
172.16.0.0/16 is variably subnetted, 2 subnets, 2 masks
C 172.16.27.0/30 is directly connected, GigabitEthernet3
L 172.16.27.1/32 is directly connected, GigabitEthernet3
Routing Table:
Gateway of last resort is 0.0.0.0 to network 0.0.0.0
S* 0.0.0.0/0 is directly connected, GigabitEthernet1
10.0.0.0/8 is variably subnetted, 4 subnets, 2 masks
C 10.0.0.0/22 is directly connected, GigabitEthernet1
L 10.0.0.1/32 is directly connected, GigabitEthernet1
172.16.0.0/16 is variably subnetted, 2 subnets, 2 masks
C 172.16.27.4/30 is directly connected, GigabitEthernet1
L 172.16.27.5/32 is directly connected, GigabitEthernet1
Routing Table:
10.0.0.0/8 is variably subnetted, 4 subnets, 2 masks
S 10.0.0.0/22 [1/0] via GigabitEthernet1
S 10.0.4.0/22 [1/0] via GigabitEthernet2
172.16.0.0/16 is variably subnetted, 2 subnets, 2 masks
C 172.16.27.0/30 is directly connected, GigabitEthernet2
L 172.16.27.2/32 is directly connected, GigabitEthernet2
C 172.16.27.4/30 is directly connected, GigabitEthernet1
L 172.16.27.6/32 is directly connected, GigabitEthernet1
Install Static Route to 10.0.0.0/22 via 172.16.27.1 (assuming Router C's IP is 172.16.27.1):
Destination Prefix: 10.0.0.0
Destination Prefix Mask: 255.255.252.0
Interface: GigabitEthernet3
Install Static Route to 10.0.4.0/22 via 172.16.27.5 (assuming Router C's IP is 172.16.27.5):
Destination Prefix: 10.0.4.0
Destination Prefix Mask: 255.255.252.0
Interface: GigabitEthernet1
Install Static Route to 10.0.6.0/24 via 172.16.27.2 (assuming Router A's IP is 172.16.27.2):
Destination Prefix: 10.0.6.0
Destination Prefix Mask: 255.255.255.0
Interface: GigabitEthernet2
Install Static Route to 10.0.0.0/22 via 172.16.27.1 (assuming Router B's IP is 172.16.27.1):
Destination Prefix: 10.0.0.0
Destination Prefix Mask: 255.255.252.0
Interface: GigabitEthernet1
Summary of Static Routes:
Router A:
ip route 10.0.0.0 255.255.252.0 GigabitEthernet3
Router B:
ip route 10.0.4.0 255.255.252.0 GigabitEthernet1
Router C:
ip route 10.0.6.0 255.255.255.0 GigabitEthernet2
ip route 10.0.0.0 255.255.252.0 GigabitEthernet1
These configurations ensure that each router knows the correct paths to reach Workstation A and File Server
2, resolving the connectivity issue.

*nslookup allows querying DNS records to verify if the new server is correctly resolving domain names.
*ping (A) tests basic connectivity, not DNS configuration.
*tracert (B) shows network path latency but doesn't test DNS.
*tcpdump (C) captures packets but isn't ideal for DNS verification.
#Reference: CompTIA Network+ N10-009 Official Documentation - DNS Testing Tools.

Reference: CompTIA Network+ Certification Exam Objectives - Network Installation section.

Elasticity is the ability of a system (often in cloud environments) to automatically scale resources up or down in real time based on demand.
A). Scalability means the ability to grow over time but not necessarily dynamically.
B). SaaS is a service model, not a resource-allocation concept.
C). Hybrid cloud is a deployment model, not a performance behavior.
References (CompTIA Network+ N10-009):
Domain: Networking Concepts - Cloud computing, elasticity vs. scalability.

The netstat output shows that multiple ports are open, including Telnet (23), FTP (20), and TFTP (69), which are potential security risks. Disabling unused ports minimizes the attack surface, reducing security vulnerabilities.
Breakdown of Options:
A). Disable the unused ports - Correct answer. Unused ports should be closed to prevent unauthorized access.
B). Enforce access control lists - ACLs help control access but do not disable unnecessary services.
C). Perform content filtering - Content filtering controls web traffic, not port security.
D). Set up a screened subnet - A DMZ (screened subnet) improves security but does not address open ports.
Reference:
CompTIA Network+ (N10-009) Official Study Guide - Domain 3.4: Given a scenario, implement network security measures.
CIS Benchmark for Linux & Windows Server Hardening