Explanation
To calculate the minimum number of disks needed for this application, we need to consider the RAID levels and their disk requirements. RAID 1 requires a minimum of two disks and provides mirroring, which means that data is duplicated on both disks. RAID 5 requires a minimum of three disks and provides striping with parity, which means that data is distributed across all disks with one disk storing parity information for error correction. RAID 5 can tolerate one disk failure without losing data. To create a 10GB RAID 1 array for log files, we need two 10GB disks. To create a 20GB RAID 5 array for data files, we need four 10GB disks (three for data and one for parity). To create a 20GB RAID 5 array for the operating system, we need another four
10GB disks (three for data and one for parity). Therefore, the total number of disks needed is 2 + 4 + 4 = 10.
However, since we can use different RAID levels for different partitions on the same disk, we can optimize the disk usage by using only eight disks as follows: Disk 1: 10GB RAID 1 (log files) + 10GB RAID 5 (data files) Disk 2: 10GB RAID 1 (log files) + 10GB RAID 5 (data files) Disk 3: 10GB RAID 5 (data files) + 10GB RAID 5 (OS) Disk 4: 10GB RAID 5 (data files) + 10GB RAID 5 (OS) Disk 5: 10GB RAID 5 (parity for data files) + 10GB RAID 5 (OS) Disk 6: 10GB RAID 5 (OS) + unused space Disk 7: 10GB RAID 5 (parity for OS)
+ unused space Disk 8: unused space References: https://en.wikipedia.org/wiki/Standard_RAID_levels

Explanation
Active-active is a configuration in which both nodes of a redundant system respond to service requests whenever possible. It can improve the performance, availability, and load balancing of the system by distributing the workload among the nodes. However, it also requires more synchronization and coordination between the nodes to avoid conflicts or errors. Verified References: [Active-active], [Redundant system]

Explanation
RAID (Redundant Array of Independent Disks) is a technology that combines multiple hard drives into a logical unit that provides improved performance, reliability, or capacity. RAID can be implemented by hardware, software, or a combination of both. Hardware RAID uses a dedicated controller to manage the RAID array, while software RAID uses the operating system or a driver to do the same1.
In this scenario, the technician noted that the RAID hard drives were functional while troubleshooting a motherboard failure. This means that the data on the drives was not corrupted or lost. However, the technician installed a spare motherboard with similar specifications and used the original components. This means that the new motherboard may not have the same RAID configuration as the old one, or it may not recognize the existing RAID array at all. Therefore, the technician needs to reconfigure the RAID in order to restore operations with minimal downtime.

Explanation
The backup type that only records changes to the data blocks on a virtual machine is snapshot. A snapshot is a point-in-time copy of a virtual machine (VM) that captures the state and data of the VM at a specific moment.
A snapshot can be created instantly and with minimal overhead, as it only stores the changes made to the VM after the snapshot was taken. A snapshot can be used to restore the VM to its previous state in case of data loss or corruption.

Explanation
Shipping is a process of sending logs from one system to another system for centralized storage and analysis.
Shipping can help ensure compliance with regulations that require financial systems logs to be stored in a central location. Shipping can also help improve security, performance, and scalability of log management.
References:
https://www.comptia.org/training/resources/exam-objectives/comptia-server-sk0-005-exam-objectives (Objective 3.4)