This is the most likely cause of preventing the users from accessing the application server because a VLAN is a logical segmentation of a network that isolates traffic based on certain criteria. If the human resources department and the application server are on different VLANs, they will not be able to communicate with each other unless there is a router or a switch that can route between VLANs. References:
https://www.cisco.com/c/en/us/support/docs/lan-switching/inter-vlan-routing/41860-howto-L3-intervlanrouting.h

Explanation
RAID 1 (mirroring) is a RAID configuration that should be used to provide redundancy for the OS on a server that has two hard drives on which to install the OS. RAID 1 (mirroring) is a configuration that duplicates data across two or more drives. It provides fault tolerance and improves read performance, but reduces storage capacity by half. If one drive fails in RAID 1, the other drive can continue to operate without data loss or system downtime. RAID 0 (striping) is a configuration that splits data across two or more drives without parity or redundancy. It improves performance but offers no fault tolerance. If one drive fails in RAID 0, all data is lost and the system cannot boot. RAID 5 (striping with parity) is a configuration that stripes data across three or more drives with parity information. It provides fault tolerance and improves performance, but reduces storage capacity by one drive's worth of space. RAID 5 can tolerate one drive failure without data loss, but not two or more. RAID 6 (striping with double parity) is a configuration that stripes data across four or more drives with double parity information. It provides fault tolerance and improves performance, but reduces storage capacity by two drives' worth of space. RAID 6 can tolerate two drive failures without data loss, but not three or more. References:
https://www.howtogeek.com/199068/how-to-upgrade-your-existing-hard-drive-in-under-an-hour/

a. DLP can be applied to various types of data, such as email, cloud storage, network traffic, or fileshares1. DLP for fileshares can help monitor and control who can access, modify, or share files on a network share2. By turning on DLP for the fileshare and letting it propagate for a week, the administrator can audit the permissions of the fileshare and see if there are any violations or anomalies in the access patterns. This can help the administrator identify and remediate any potential risks or compliance issues related to the fileshare2. The other options are incorrect because they are not directly related to DLP for fileshares. Managing the fileshare from an RDP session or from the fileshare itself are administrative tasks that do not require DLP. Auditing the access to the physical fileshare is a physical security measure that is not affected by DLP.

Reference:
https://sucuri.net/guides/what-is-brute-force-attack/