Network Installation: Allows the OS image to be deployed from a central server, streamlining deployment across multiple systems simultaneously. This is significantly faster than individual installations from other media. (CompTIA Server+ Objectives SK0-004: 3.1) Why other options are less optimal:
Embedded: Refers to OSes pre-installed on hardware and not intended for mass deployment.
Optical (CDs/DVDs): Requires physical media insertion on each server, slower than network distribution.
USB Similar to optical, requires individual installations and can be time-consuming for multiple servers.

A warm site is a type of disaster recovery site that has a target storage array that receives replication traffic and servers that are only powered on in the event of a disaster. A warm site is a compromise between a hot site and a cold site. A warm site has some equipment and data ready, but requires some configuration and restoration before resuming operations. A warm site is usually located in a different geographic area than the primary site and has redundant power, cooling, network, and security systems. A warm site is suitable for organizations that can tolerate some downtime and data loss in case of a disaster. A cloud site is a type of disaster recovery site that uses cloud-based resources and platforms to store backups and restore data and applications after a disaster. A cold site is a type of disaster recovery site that has only basic infrastructure and space available, but requires significant setup and installation before resuming operations. A hot site is a type of disaster recovery site that has all the equipment and data ready to resume operations as soon as possible after a disaster.
References: https://www.techopedia.com/definition/11172/hot-site
https://www.techopedia.com/definition/11173/warm-site
https://www.techopedia.com/definition/11174/cold-site
https://www.techopedia.com/definition/29836/cloud-recovery

A template is a preconfigured virtual machine image that can be used to create new virtual machines quickly and easily. A template can include the operating system, applications, settings, and data that are required for a specific purpose or role. A type 1 hypervisor is a virtualization technology that runs directly on bare metal hardware, without requiring an underlying operating system. A type 1 hypervisor can provide better performance, security, and isolation for virtual machines than a type 2 hypervisor, which runs on top of an operating system. Verified References: [Template], [Type 1 hypervisor]

This is the most likely cause of preventing the users from accessing the application server because a VLAN is a logical segmentation of a network that isolates traffic based on certain criteria. If the human resources department and the application server are on different VLANs, they will not be able to communicate with each other unless there is a router or a switch that can route between VLANs. References:
https://www.cisco.com/c/en/us/support/docs/lan-switching/inter-vlan-routing/41860-howto-L3-intervlanrouting.h

RAID 6 is a type of RAID that uses block-level striping with two parity blocks distributed across all member disks. It allows for two disk failures within the RAID set before any data is lost1. A minimum of four disks is required to create RAID 61. To increase the size of an existing RAID 6 array, the administrator can replace the array drives one at a time with larger drives and then expand the array. This way, the data and parity are rebuilt on each new drive and the array remains operational during the process2.