Updating the firmware on the NIC is the most likely solution to fix the issue of a new 40GB NIC not being detected within the Windows server OS. Firmware is a software program that controls the functionality of a hardware device, such as a NIC (network interface card). A NIC is a device that enables network communication for a server by providing an interface between the server and the network cable or wireless connection. Updating the firmware on the NIC can improve its performance, compatibility, and stability with the server OS and network protocols. Reference: CompTIA Server+ Certification Exam Objectives, Domain 4.0: Networking, Objective 4.1: Given a scenario, configure network settings for servers.

A server has multiple fans inside the chassis to cool down the components and prevent overheating. If one of the fans fails, it can cause the server to reboot and crash due to thermal issues. A failed fan can also make loud noises due to friction or vibration. The administrator should check the fans and clean them from dust and debris, or replace them if they are damaged12.
Reference = 1: It's Too Loud! 3 Solutions to Remedy Server Noise - Computerware Blog | DC Metro | Computerware Blog(https://www.cwit.com/blog/it-s-too-loud-3-solutions-to-remedy-server-noise) 2: What factors affect the noise level of a server? - Server Fault(https://serverfault.com/questions/430550/what-factors-affect-the-noise-level-of-a-server)

Reference:
https://www.redhat.com/en/topics/data-storage/network-attached-storage

The IP address/default gateway combination that the administrator should have used for the new server is IP address: 192.168.10.2/24 and Default gateway: 192.168.10.1. The IP address and the default gateway of a device must be in the same subnet to communicate with each other. A subnet is a logical division of a network that allows devices to share a common prefix of their IP addresses. The subnet mask determines how many bits of the IP address are used for the network prefix and how many bits are used for the host identifier. A /24 subnet mask means that the first 24 bits of the IP address are used for the network prefix and the last 8 bits are used for the host identifier. Therefore, any IP address that has the same first 24 bits as the default gateway belongs to the same subnet. In this case, the default gateway has an IP address of 192.168.10.1/24, which means that any IP address that starts with 192.168.10.x/24 belongs to the same subnet. The new server has an IP address of 192.168.1.1/24, which does not match the first 24 bits of the default gateway, so it belongs to a different subnet and cannot communicate with the default gateway. To fix this issue, the administrator should change the IP address of the new server to an unused IP address that starts with 192.168.10.x/24, such as 192.168.10.2/24.