The goal is to achieve2TB total storage,high performance, andsupport for one drive failure. Using RAID 5 or RAID 10 can provide redundancy while maximizing performance.
* 1, 2, 4, 5, and 6 (Answer C):This selection includes the highest-capacity and highest-performance drives (600GB and 500GB at high RPM speeds). Using these drives will provide the necessary capacity (500GB + 600GB + 500GB + 600GB + 600GB = 2.8TB) and performance with one drive redundancy (RAID 5 or 10).
* Other options (A, B, D):These combinations either lack the necessary capacity or mix slower drives (7,200rpm), reducing overall performance.
CompTIA Server+ Reference:This topic is covered underSK0-005 Objective 1.5: Explain storage technologies and RAID configurations.

Changing the boot order on the server and restricting console access would prevent unauthorized access attempts via USB devices at startup, as the server would not boot from any external media and only authorized users could access the console. Setting a BIOS/UEFI password on the server would also help, but it could be bypassed by resetting the CMOS battery or using a backdoor password. Configuring the host OS to deny login attempts via USB would not prevent booting from a malicious USB device that could compromise the system before the OS loads. Disabling all the USB ports on the server would limit functionality, as some peripherals or devices may need to use them. References:
* https://www.pcmag.com/how-to/dont-plug-it-in-how-to-prevent-a-usb-attack
* https://www.techopedia.com/definition/10362/boot-order
* https://www.techopedia.com/definition/10361/console-access
* https://www.techopedia.com/definition/102/bios-password
* https://www.techopedia.com/definition/10363/cmos-battery

This is the most likely misconfigured setting because the default gateway is the router that connects the local network to other networks. If the default gateway is incorrect, the server will not be able to communicate with remote users or devices outside its own subnet. References: https://docs.microsoft.com/en-us/windows-server
/administration/windows-commands/ipconfig

The net use command is a Windows command that can be used to create a batch script to map multiple shares.
The net use command can connect or disconnect a computer from a shared resource, such as a network drive or a printer, or display information about computer connections. The syntax of the net use command is:
net use [devicename | *] [\\computername\sharename[\u0003volume] [password | *]] [/user:[domainname\] username] [/user:[dotted domain name\]username] [/user:[[username@dotted domain name] [/savecred] [
/smartcard] [{/delete | /persistent:{yes | no}}]
where:
devicename = the drive letter or printer port to assign to the shared resource computername = the name of the computer that provides access to the shared resource sharename = the name of the shared resource password = the password needed to access the shared resource /user = specifies a different username to make the connection /savecred = stores the provided credentials for future use /smartcard = uses a smart card for authentication /delete = cancels a network connection and removes the connection from the list of persistent connections /persistent = controls whether the connection is restored at logon To create a batch script to map multiple shares, you can use the net use command with different drive letters and share names, for example:
net use W: \\computer1\share1 net use X: \\computer2\share2 net use Y: \\computer3\share3 You can also add other options, such as passwords, usernames, or persistence, as needed. To save the batch script, you can use Notepad or any text editor and save the file with a .bat extension12.
References: 1 https://docs.microsoft.com/en-us/windows-server/administration/windows-commands/net- use 2 https://www.watchingthenet.com/create-a-batch-file-to-map-drives-folders.html

The most likely cause of the servers displaying the wrong time is A. A firewall. A firewall is a network security device that monitors and controls incoming and outgoing network traffic based on predefined rules. A firewall can block or allow certain ports, protocols, or applications that are used for network communication.
One of the protocols that is used for time synchronization is the Network Time Protocol (NTP), which requires the use of UDP port 123 for all time synchronization1. If a firewall blocks this port, it can prevent the servers from obtaining the correct time from the time source. Therefore, the server administrator should check the firewall settings and make sure that UDP port 123 is allowed for NTP traffic.