The tool that the administrator should use to check for unnecessary running services across 12 servers is a port scanner. A port scanner is a tool that scans a network device for open ports and identifies the services or applications that are running on those ports. A port scanner can help detect any unauthorized or unwanted services that may pose a security risk or consume network resources. A port scanner can also help troubleshoot network connectivity issues or verify firewall rules.
Reference: https://www.getsafeonline.org/business/articles/unnecessary-services/

The administrator should implement separate circuits first to address the issue of power issues due to the increased load. Separate circuits are electrical wiring systems that provide independent power sources for different devices or groups of devices. By using separate circuits, the administrator can avoid overloading a single circuit with too many servers and reduce the risk of power outages, surges, or fires. Separate circuits also provide redundancy and fault tolerance, as a failure in one circuit will not affect the other circuit.

A 1000BASE-LX 1Gb single-mode plenum fiber connection would best meet the analyst's needs for a new point-to-point Ethernet connection between a university campus and a newly acquired space downtown that is about 5mi (8km) away. A 1000BASE-LX is a type of Ethernet standard that supports data transmission at 1 gigabit per second over single-mode fiber cables using long wavelength lasers. A single-mode fiber cable is a type of optical fiber cable that has a small core diameter and allows only one mode of light to propagate through it. A single-mode fiber cable can transmit data over long distances at high speeds, but it requires more expensive transceivers and connectors than multimode fiber cables. A plenum fiber cable is a type of optical fiber cable that has a special coating that prevents the spread of fire or toxic fumes in case of burning. A plenum fiber cable is suitable for installation in plenum spaces, which are areas used for air circulation in buildings, such as above ceilings or below floors. References: [CompTIA Server+ Certification Exam Objectives], Domain 4.0: Networking, Objective 4.2: Given a scenario involving server networking issues (e.
g., network interface card failure), troubleshoot using appropriate tools.

The write cache is a feature of some RAID controllers that allows them to temporarily store data in a fast memory buffer before writing it to the disk drives. This improves the performance and efficiency of write operations, especially for random and small writes. However, if the battery on the controller goes bad, the controller may disable the write cache to prevent data loss in case of a power failure. This can degrade the disk drive performance significantly, as every write operation will have to wait for the disk drives to complete. References: https://www.dell.com/support/kbdoc/en-us/000131486/understanding-raid-controller- battery-learn-cyclehttps://www.techrepublic.com/article/understanding-raid-controller-write-cache/

The best solutions to resolve the concern of transmissions from the building being detected from outside are signal blocking and reflective glass. Signal blocking is a method of preventing or interfering with electromagnetic signals from escaping or entering a certain area. Signal blocking can be achieved by using various materials or devices that create physical barriers or generate noise or jamming signals. Signal blocking can protect data transmissions from being intercepted or eavesdropped by unauthorized parties.
Reflective glass is a type of glass that has a coating or film that reflects light and heat. Reflective glass can reduce glare and solar radiation, as well as prevent visual observation from outside. Reflective glass can enhance privacy and security for datacenter operations.