* QSFP+ (Quad Small Form-Factor Pluggable Plus): This transceiver type is designed specifically to handle 40Gbps network speeds. QSFP+ connectors are hot-swappable and support various cable types, including fiber optic and copper (DAC).
* 10GigE: While a valid network technology, 10GigE only supports up to 10Gbps, not the required
40Gbps.
* SFP (Small Form-factor Pluggable): A common transceiver type, but the standard SFP only supports a maximum of 1Gbps.
* SFP+ (Enhanced Small Form-factor Pluggable): Supports up to 10Gbps, not sufficient for 40Gbps in this scenario.
References:
* CompTIA Server+ Objectives (Exam codes SK0-004 or SK0-005): Search for sections on networking standards and transceiver types.

Signal blocking is a technique that prevents or reduces the transmission of electromagnetic signals from a building to the outside. Signal blocking can be achieved by using materials that absorb, reflect, or scatter the signals, such as metal, concrete, or mesh. Signal blocking can protect the data center from eavesdropping, interference, or jamming by unauthorized parties1.
Camouflage is a technique that disguises or conceals the appearance of a building to make it less noticeable or identifiable from the outside. Camouflage can be achieved by using colors, patterns, shapes, or vegetation that blend in with the surrounding environment. Camouflage can protect the data center from detection, reconnaissance, or targeting by hostile parties

A misconfigured hosts file can cause name resolution issues on a server. A hosts file is a text file that maps hostnames to IP addresses on a local system. It can be used to override DNS settings or provide custom name resolution for testing purposes. However, if the hosts file contains incorrect or outdated entries, it can prevent the system from resolving hostnames properly and cause connectivity problems. To fix this issue, the administrator should check and edit the hosts file accordingly.

Reference:https://docs.oracle.com/cd/E26996_01/E18549/html/BABHBFHA.html

Uplink redundancy is a method used to ensure that if one physical network interface card (NIC) fails, the network connectivity for the virtual machines (VMs) does not go down. This is typically achieved by configuring multiple NICs to connect to a single virtual switch (vSwitch) and setting up NIC teaming or bonding. The vSwitch manages the internal network traffic between the VMs and the outside network by using the physical NICs assigned to it. By configuring the vSwitch with multiple NICs, you can create redundancy, so if one NIC fails, the other NICs can take over the traffic, ensuring continuous network connectivity.