A.You specify which adaptor will take the load until it is saturated, then the other members will start accepting packets until the Preferred Primary is just below the saturation point.

B.You specify which adaptor will take the entire load. The other NICs will be used only when the Preferred Primary fails.

C.You specify the desired card for all incoming traffic for the team. The other members will still transmit outgoing packets.

D.You specify the desired card for all outgoing traffic for the team. The other members will still accept incoming packets.

A.Setup Wizard

B.Drive Utility

C.Server Setup

D.System Tools

A.ipconfig

B.netstat -s

C.ifconfig -a

D.netconfig -r

A.You can launch the Summary page of Server Administrator and view the Operating System and BIOS versions you have installed on your system.

B.Since you renamed the administrator user name, you can log in to Server Administrator as normal user, but not as an administrator.

C.You can update the BIOS on this system.

D.Since you renamed the administrator name, its security ID is changed. Now you cannot log in to Server Administrator.

A.You remove and reinstall the drivers.

B.You confirm the Device List. Ctrl setting is set to Adapter-Enabled.

C.You install a different adapter in the same slot.

D.You reseat the adapter in its slot or a different slot.