IGMP

The 802.11b protocol is the correct choice for the network administrator to satisfy the specified requirements. This protocol operates in the 2.4 GHz frequency band, uses Direct-Sequence Spread Spectrum (DSSS) for modulation, and provides a data rate of up to 11 Mbits/s, which is well above the minimum requirement of 2 Mbits/s. The 802.11b standard also uses a channel width of 22 MHz, which matches the given specification. It was designed to be backward compatible with the original 802.11 standard and is widely used due to its range and compatibility with many devices.
Reference:
IEEE 802.11b-1999 standard documentation.
Wireless LAN Medium Access Control (MAC) and Physical Layer (PHY) Specifications1.

The Distance Vector Multicast Routing Protocol (DVMRP) is used to share information between routers to transport IP Multicast packets among networks. It uses a reverse path-flooding technique and is used as the basis for the Internet's multicast backbone (MBONE). In particular, DVMRP is notorious for poor network scaling, resulting from reflooding, particularly with versions that do not implement pruning. DVMRP's flat unicast routing mechanism also affects its capability to scale.
Answer option A is incorrect. The Resource Reservation Protocol (RSVP) is a Transport layer protocol designed to reserve resources across a network for an integrated services Internet. RSVP does not transport application data but is rather an Internet control protocol, like ICMP, IGMP, or routing protocols. RSVP provides receiver-initiated setup of resource reservations for multicast or unicast data flows with scaling and robustness.
RSVP can be used by either hosts or routers to request or deliver specific levels of quality of service (QoS) for application data streams. RSVP defines how applications place reservations and how they can leave the reserved resources once the need for them has ended. RSVP operation will generally result in resources being reserved in each node along a path.
Answer option C is incorrect. A remote procedure call (RPC) hides the details of the network by using the common procedure call mechanism familiar to every programmer. Like any ordinary procedure, RPC is also synchronous and parameters are passed to it. A process of the client calls a function on a remote server and remains suspended until it gets back the results.
Answer option D is incorrect. LWAPP (Lightweight Access Point Protocol) is a protocol used to control multiple Wi-Fi wireless access points at once. This can reduce the amount of time spent on configuring, monitoring, or troubleshooting a large network. This also allows network administrators to closely analyze the network.

The correct Wireshark filter to detect a SYN/FIN DDoS attempt is tcp.flags==0X029. This filter is designed to capture packets where both the SYN and FIN flags are set, which is an unusual combination and indicative of a SYN/FIN attack. In a typical three-way TCP handshake, the SYN and FIN flags are not set in the same TCP segment. A SYN flag is used to initiate a connection, and a FIN flag is used to politely close a connection. Therefore, seeing both flags set in the same packet suggests a possible SYN/FIN DDoS attack.