A server administrator needs to configure iDRAC to send email alerts. When the administrator runs a test, the error "Sending the test mail failed" is returned.
The administrator enables platform event filter alerts and configures the following settings:
IP: 172.168.1.10/24
Gateway: 172.16.1.1
DNS: 172.168.1.100
SMTP: 172.168.1.5
Destination email address (enabled): administrator@example com
The administrator has NOT made any other changes to iDRAC.
What should the administrator do to correct the issue?

What are two ways to check on the health status of a server?(Select 2)

Which component of the Dell EMC PowerEdge 13G server can be used as an indicator to locate a specific system within a rack?

A technician needs to install a server with a PERC RAID controller and 24, 2.5" SAS SED drives.
The installation requires the following items to be created:
- Three equal-sized virtual disks
- Encrypted virtual disks
- A global hot spare
In addition to selecting the physical drive to be the hot spare disk, what tasks should the technician perform to set up the RAID controller?

A technician working with a Dell EMC PowerEdge 1 take corrective action?