Online Access Free EMC.D-PSC-MN-01.v2025-08-13.q73 Practice Test (Page 4)

D-PSC-MN-01 Exam Question 11

A Dell PowerScale Gen 6 chassis is being installed. The chassis has been aligned with the rails.
What is the correct order of steps to finish the installation?

A.1. Secure the lift casters on the floor.
2. Slide the first few inches of the back of the chassis onto the supporting ledge of the rails.
3. Release the lift casters and carefully slide the chassis into the cabinet as far as the lift allows.
4. Push the node off the lift arms and into the rack.
5. Install two mounting screws at the top and bottom of each rail to secure the chassis to the rack.

B.1. Release the lift casters and carefully slide the chassis into the cabinet as far as the lift allows.
2. Push the node off the lift arms and into the rack.
3. Install two mounting screws at the top and bottom of each rail to secure the chassis to the rack.
4. Slide the first few inches of the back of the chassis onto the supporting ledge of the rails.
5. Secure the lift casters on the floor.

C.1. Install two mounting screws at the top and bottom of each rail to secure the chassis to the rack.
2. Release the lift casters and carefully slide the chassis into the cabinet as far as the lift allows.
3. Secure the lift casters on the floor.
4. Slide the first few inches of the back of the chassis onto the supporting ledge of the rails.
5. Push the node off the lift arms and into the rack.

D.1. Push the node off the lift arms and into the rack.
2. Release the lift casters and carefully slide the chassis into the cabinet as far as the lift allows.
3. Install two mounting screws at the top and bottom of each rail to secure the chassis to the rack.
4. Slide the first few inches of the back of the chassis onto the supporting ledge of the rails.
5. Secure the lift casters on the floor.

D-PSC-MN-01 Exam Question 12

An organization has a cluster of F800 nodes running OneFS version 9.0. A platform engineer is planning to add a new node pool of F600 nodes. While unpacking the first F600 node, the IT manager notices two of the ten drive bays are empty and asks the platform engineer about it.
How should the platform engineer respond?

A.F600 nodes only use 8 of the 10 drive bays

B.Two empty drive bays are dedicated for L3 cache

C.Sales order shows 8-drive nodes instead of 10-drive nodes

D.Two additional drives are packaged separately

D-PSC-MN-01 Exam Question 13

What is the purpose of SolVe Desktop?

A.Gather logs from the cluster for analysis

B.Perform pre-upgrade checks on the cluster

C.Provide centralized access to step-by-step procedures

D.Provide access to the latest OneFS codes and firmware upgrades

D-PSC-MN-01 Exam Question 14

Windows clients cannot connect using the fully qualified domain name when testing the connectivity of a newly created cluster. What connection test identifies the problem?

A.DNS

B.NFS Mount

C.Mapping a Windows drive

D.WebUI using IP address

D-PSC-MN-01 Exam Question 15

Which tools are indispensable for maintaining compliance within a PowerScale cluster? (Select two)

A.Automated policy enforcement engines

B.File system auditing tools

C.Configuration management databases

D.Network traffic analyzers

Other Version: 1177EMC.D-PSC-MN-01.v2025-03-19.q80

Latest Upload: 150Pegasystems.PEGACPDC25V1.v2026-07-17.q45; 249CompTIA.N10-009.v2026-07-17.q230; 170EMC.D-PDM-DY-23.v2026-07-17.q66; 165Salesforce.ADM-201.v2026-07-17.q63; 406PMI.CAPM.v2026-07-17.q643; 167Cisco.300-215.v2026-07-17.q60; 450CollegeAdmission.PMHNP.v2026-07-17.q640; 230Microsoft.MB-240.v2026-07-17.q174; 144SAP.C_CE325_2601.v2026-07-17.q37; 300Microsoft.AZ-900.v2026-07-16.q224

D-PSC-MN-01 Exam Question 11

D-PSC-MN-01 Exam Question 12

D-PSC-MN-01 Exam Question 13

D-PSC-MN-01 Exam Question 14

D-PSC-MN-01 Exam Question 15

Download PDF File