Online Access Free Google.Professional-Cloud-Network-Engineer.v2022-02-17.q85 Practice Test (Page 2)

Professional-Cloud-Network-Engineer Exam Question 1

Your end users are located in close proximity to us-east1 and europe-west1. Their workloads need to communicate with each other. You want to minimize cost and increase network efficiency.
How should you design this topology?

A.Create 2 VPCs, each with their own regions and individual subnets. Create 2 VPN gateways to establish connectivity between these regions.

B.Create 2 VPCs, each with their own region and individual subnets. Use external IP addresses on the instances to establish connectivity between these regions.

C.Create 1 VPC with 2 regional subnets. Create a global load balancer to establish connectivity between the regions.

D.Create 1 VPC with 2 regional subnets. Deploy workloads in these subnets and have them communicate using private RFC1918 IP addresses.

Professional-Cloud-Network-Engineer Exam Question 2

You created a VPC network named Retail in auto mode. You want to create a VPC network named Distribution and peer it with the Retail VPC.
How should you configure the Distribution VPC?

A.Create the Distribution VPC in auto mode. Peer both the VPCs via network peering.

B.Create the Distribution VPC in custom mode. Use the CIDR range 10.0.0.0/9. Create the necessary subnets, and then peer them via network peering.

C.Create the Distribution VPC in custom mode. Use the CIDR range 10.128.0.0/9. Create the necessary subnets, and then peer them via network peering.

D.Rename the default VPC as "Distribution" and peer it via network peering.

Professional-Cloud-Network-Engineer Exam Question 3

A.Create 2 VPCs, each with their own regions and individual subnets. Create 2 VPN gateways to establish connectivity between these regions.

B.Create 2 VPCs, each with their own region and individual subnets. Use external IP addresses on the instances to establish connectivity between these regions.

C.Create 1 VPC with 2 regional subnets. Create a global load balancer to establish connectivity between the regions.

D.Create 1 VPC with 2 regional subnets. Deploy workloads in these subnets and have them communicate using private RFC1918 IP addresses.

Professional-Cloud-Network-Engineer Exam Question 4

In order to provide subnet level isolation, you want to force instance-A in one subnet to route through a security appliance, called instance-B, in another subnet.
What should you do?

A.Move instance-B to another VPC and, using multi-NIC, connect instance-B's interface to instance-A's network. Configure the appropriate routes to force traffic through to instance-A.

B.Create a more specific route than the system-generated subnet route, pointing the next hop to instance-B with a tag applied to instance-A.

C.Create a more specific route than the system-generated subnet route, pointing the next hop to instance-B with no tag.

D.Delete the system-generated subnet route and create a specific route to instance-B with a tag applied to instance-A.

Professional-Cloud-Network-Engineer Exam Question 5

You want to deploy a VPN Gateway to connect your on-premises network to GCP. You are using a non BGP- capable on-premises VPN device. You want to minimize downtime and operational overhead when your network grows. The device supports only IKEv2, and you want to follow Google-recommended practices.
What should you do?

A.* Create a Cloud VPN instance.
* Create a policy-based VPN tunnel per subnet.
* Configure the appropriate local and remote traffic selectors to match your local and remote networks.
* Create the appropriate static routes.

B.* Create a Cloud VPN instance.
* Create a policy-based VPN tunnel.
* Configure the appropriate local and remote traffic selectors to match your local and remote networks.
* Configure the appropriate static routes.

C.* Create a Cloud VPN instance.
* Create a route-based VPN tunnel.
* Configure the appropriate local and remote traffic selectors to match your local and remote networks.
* Configure the appropriate static routes.

D.* Create a Cloud VPN instance.
* Create a route-based VPN tunnel.
* Configure the appropriate local and remote traffic selectors to 0.0.0.0/0.
* Configure the appropriate static routes.

Other Version: 669Google.Professional-Cloud-Network-Engineer.v2026-10-09.q135; 1131Google.Professional-Cloud-Network-Engineer.v2026-02-01.q106; 1642Google.Professional-Cloud-Network-Engineer.v2024-12-11.q112; 1501Google.Professional-Cloud-Network-Engineer.v2024-05-06.q121; 1170Google.Professional-Cloud-Network-Engineer.v2024-02-05.q70; 1939Google.Professional-Cloud-Network-Engineer.v2022-09-17.q73; 2512Google.Professional-Cloud-Network-Engineer.v2022-05-31.q72; 124Google.Passexamdumps.Professional-Cloud-Network-Engineer.v2022-02-28.by.stanford.72q.pdf; 107Google.Examcollectionpass.Professional-Cloud-Network-Engineer.v2021-08-08.by.dempsey.84q.pdf

Latest Upload: 188HP.HPE7-A12.v2026-10-23.q52; 636ISACA.CRISC.v2026-10-23.q969; 145NetworkAppliance.NS0-077.v2026-10-23.q27; 159PaloAltoNetworks.XDR-Engineer.v2026-10-23.q35; 144Fortinet.NSE7_CDS_AR-7.6.v2026-10-23.q30; 212Cisco.350-101.v2026-10-22.q56; 174PECB.ISO-IEC-27002-Foundation.v2026-10-21.q32; 363Cisco.300-415.v2026-10-21.q228; 241Fortinet.NSE5_FSW_AD-7.6.v2026-10-20.q51; 286EC-COUNCIL.212-89.v2026-10-20.q204

Professional-Cloud-Network-Engineer Exam Question 1

Professional-Cloud-Network-Engineer Exam Question 2

Professional-Cloud-Network-Engineer Exam Question 3

Professional-Cloud-Network-Engineer Exam Question 4

Professional-Cloud-Network-Engineer Exam Question 5

Download PDF File