Online Access Free H3C.GB0-191-ENU.v2022-05-28.q125 Practice Test (Page 3)

GB0-191-ENU Exam Question 6

Among the following statements about Easy IP, the correct one is ______. (Multiple choice)

A.Easy IP is suitable for NAT device dialing or dynamically obtaining public network IP address

B.Easy IP is a special case of NAPT

C.When configuring Easy IP, there is no need to configure ACL to match the packets that need to be translated by NAT

D.No need to configure NAT address pool when configuring Easy IP

GB0-191-ENU Exam Question 7

The following statement about WAN is wrong. ______.

A.The HDLC protocol can be encapsulated on the synchronous link or on the asynchronous link. Only supports synchronization

B.The HDLC protocol only supports point-to-point links, not point-to-multipoint links.

C.When the CE1/PRI interface uses E1 working mode, it is equivalent to an interface with no time slot division and a data bandwidth of 2Mbps. Its characteristics are the same as the synchronous serial port, supporting PPP, frame relay, LAPB and X.25 And other data link layer protocols, supporting network protocols such as IP and IPX.

D.When the CE1/PRI interface uses the CE1/PRI working mode, it is physically divided into 32 time slots, the corresponding numbers are 0~31, of which time slot 0 is used to transmit synchronization information.

GB0-191-ENU Exam Question 8

If a port running STP in the Ethernet switch does not receive or forward data, receives but does not send BPDUs, and does not perform address learning, then the port should be in the ______ state.

A.Listening

B.Blocking

C.Forwarding

D.Learning

E.Disable

F.Waiting

GB0-191-ENU Exam Question 9

The network administrator of a company needs to set a subnet mask to divide the Class C network 211.110.10.0 that he is responsible for into 14 subnets. Each subnet is required to contain as many hosts as possible, so he should use a subnet mask of _____ bits code. (Please fill in Arabic numerals)

GB0-191-ENU Exam Question 10

Which of the following descriptions about Frame Relay DLCI are wrong? (multiple choice)

A.The range of DLCI that users can use is 15~1007

B.DLCI is used to identify a physical interface or logical interface on the router

C.In the frame relay switching network, the frame relay frame only changes the destination DLCI, that is, the value of the next hop DLCI, and does not change the value of the source DLCI at the sending end

D.On the same link, each virtual circuit is identified by a unique DLCI

Other Version: 4188H3C.GB0-191-ENU.v2022-10-18.q120; 35H3C.Test4engine.GB0-191-ENU.v2022-03-17.by.marian.125q.pdf; 4937H3C.GB0-191-ENU.v2021-10-10.q101

Latest Upload: 133ACSM.020-222.v2025-09-11.q48; 156VMware.5V0-31.23.v2025-09-10.q73; 130Oracle.1z0-915-1.v2025-09-10.q24; 159Citrix.1Y0-231.v2025-09-10.q87; 134SAP.C-THR85-2505.v2025-09-09.q29; 164Adobe.AD0-E727.v2025-09-09.q76; 128Oracle.1Z0-1123-25.v2025-09-09.q20; 134SAP.C_SIGPM_2403.v2025-09-08.q20; 249EXIN.ITIL.v2025-09-08.q161; 168BCS.PC-BA-FBA-20.v2025-09-08.q45

GB0-191-ENU Exam Question 6

GB0-191-ENU Exam Question 7

GB0-191-ENU Exam Question 8

GB0-191-ENU Exam Question 9

GB0-191-ENU Exam Question 10

Download PDF File