The user can use the ______ command to view the history commands.

After configuring NAPT, it is found that some internal network addresses can always ping the external network, while others cannot. The possible reasons are ______.

On MSR routers, the -m parameter of the ping command specifies the time interval for sending ICMP Echo Request packets, ranging from 1 to 65535 in milliseconds, and its default value is ______ milliseconds.

The default data transfer port used by FTP is ______.

An empty-configured MSR router is connected to the local LAN user through the GE0/0 interface, and directly connected to the remote router through the S1/0 interface. The IP addresses of GE0/0 interface and S1/0 interface are 10.1.1.1/24 and 172.16.1.1/30 respectively.
In order to ensure the intercommunication with remote LAN users, the following routes are configured on the MSR:
[MSR] ip route 10.20.0.0 255.255.255.0 s1/0
After the configuration, the MSR receives the data packet sent to the destination address 10.20.0.254/24. After the static route is found in the routing table, how will the MSR deal with the data packet next?