The MAC address table on a layer 2 switch is shown in the figure.

When the switch receives a frame with a destination MAC address of 00-13-72-8E-4E-C4 from the E1/0/2 interface, the switch will ______ the frame. (Multiple choice)

Which of the following messages are used in IPv6 address resolution? (multiple choice)

A Layer 3 switch is connected to the GE0/0 interface of the customer's router MSR-1, and this Layer 3 switch is the default gateway for multiple network segments of the customer's office network to which it is connected. MSR-1 is connected to the Internet through the serial port S1/0. The entire network has been interoperable normally, and office network users can access the Internet. Add the following ACL configuration on the router:
firewall enable
acl number 3004
rule 0 deny ip source 192.168.1.0 0.0.0.255
rule 5 permit tcp source 192.168.0.0 0.0.255.255
rule 10 permit icmp
At the same time, ACL 3004 is applied in the inbound direction of GE0/0, then ______. (Multiple choice)

The correct statement about the IP address below is ______. (Multiple choice)

Different priority levels can be configured for Telnet users on the MSR router. What is wrong about this priority level is ______. (Multiple choice)