A.There are two ways to expand the capacity of the combined system. One is to modify the antenna at the end of the system, insert a combiner, and add APs; the other is to use a dedicated WLAN dual AP combiner

B.When adding AP joint points on the original indoor sub-system, if the original system has power amplifier equipment, the AP joint position should be selected behind the power amplifier device.

C.For a distributed deployment design with the same environment layout on each floor, a uniform and symmetrical antenna feeder design can be selected. For example, the combined location of each floor, the number of APs, the number of couplers and power splitters, and the device specifications can all be unified

D.Under normal circumstances, there cannot be more than 1 WLAN signal on the main path of the combined system, which will cause mutual interference of WLAN signals and fail to demodulate.

A.Various types of gain antennas, tapes, straps, etc.

B.wireshark

C.Digital Camera

D.AP

E.Terminal equipment used by customers in actual business, such as PDA, WIFI phone, etc.

F.Enterprise-class wireless network card

A.True

B.False

A.AP zero configuration, console port is useless, the hardware is mainly composed of CPU + memory + RF, configuration and software must be downloaded from the wireless switch.

B.The wireless switch is a Layer 3 device, only one VLAN interface IP address and system IP address (usually the same) can be configured, and only static routing can be configured.

C.H3C's universal wireless solution can be deployed on any existing Layer 2 or Layer 3 LAN topology without the need to reconfigure the backbone or hardware. Wireless switches and managed access points AP can be located anywhere in the network.

A.Specify different vlan attributes when adding the same service template (ie SSID) under different Aps

B.After passing the authentication, radius dynamically issues the client vlan attributes

C.Statically bind the wireless client on the controller to score the MAC address and vlan