A.HPE Superdome Flex 280

B.HPE Synergy Virtual Connect SE 32Gb FC Module

C.HPE B-series SN6600B Fibre Channel Switch

D.HPE MSA 2062 Storage Array

E.HPE Synergy 480 Compute Modules

A.Both FlexNlCs must be connected to the same network.

B.The sFlow option must be enabled and configured.

C.An upgrade license must be purchased and deployed.

D.The Compute Module profile must have exactly two connections defined.

A.Additional uplink ports can be added to ETH-Uplink to increase available bandwidth.

B.The maximum supported number of the internal networks for logical interconnect is configured.

C.FC uplinks are not supported and will be converted to FCoE or RoCE uplinks.

D.For FC uplink sets, an additional uplink from second module should be added for redundancy.

A.The IP address assigned to HPE Composer installed in a remote site must be registered in a primary site.

B.Management ports of the remote frame link topology must be connected to the management LAN.

C.Multi-site licenses must be added to HPE OneView and activate for all available HPE Synergy frames.

D.The HPE OneView certificate from the primary site must be added to HPE OneView in the remote site.