A Network Operator is configuring an access port on an AOS-CX switch for a user's workstation.
The workstation should only be able to communicate with other devices in the "Staff" VLAN, which has a VLAN ID of 100.
Which two commands are essential to configure the switch port correctly? (Choose 2.)

A Solutions Architect is diagnosing a network issue where a specific server is unreachable. The architect uses `traceroute` and the output stops at a particular router, which is the last responsive hop. The architect now wants to verify the complete routing table on that specific router to understand why it is not forwarding the traffic correctly.
1 10.1.1.1 (10.1.1.1) 1.123 ms 1.122 ms 1.121 ms
2 10.10.1.2 (10.10.1.2) 5.432 ms 5.433 ms 5.432 ms
3 * * *
4 * * *
The last responsive hop is 10.10.1.2.
Which command would the architect use on the router at 10.10.1.2 to validate its entire Layer 3 forwarding table?

A Network Operator is reviewing the VLAN configuration on an AOS-CX switch.
show vlan
VLAN ID Name Status
- -- --
1 DEFAULT_VLAN Active
10 Sales Active
20 Engineering Active
30 Marketing Active
What is the primary purpose of creating these separate VLANs?

A Solutions Architect is designing a highly available core layer for a campus network using two HPE Aruba Networking CX 8325 switches. The primary goals are to provide a single, unified management point, eliminate Spanning Tree Protocol (STP) for core links, and ensure seamless failover for downstream access layer switches and connected devices. The architect has chosen to implement Virtual Switching Framework (VSF) to stack the two core switches. What is the primary benefit of using VSF in this design compared to traditional redundancy protocols like STP?

A network technician is configuring an Access Control List (ACL) to enhance security. The goal is to permit a specific host (192.168.10.50) to access a web server (10.0.0.10) but deny all other traffic from the 192.168.10.0/24 subnet.
Review the following ACL configuration:
ip access-list standard WEBSERVER-ACL
10 permit host 192.168.10.50
20 deny any
interface vlan 10
ip access-group WEBSERVER-ACL in
What is the result of applying this ACL?